Rear Foot Disc Brake Master Cylinder Assembly with Oiler Replacement for 110cc 125cc 150cc 200cc 250cc ATV Quad Dune Buggy
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The thickness of the sheet is 155mm or
Does this apply to the majority of Chinese ATVs? Bikes with dirt on them. Each 7" disc measures approximately 7" in diameter.
There are two threads on the master cylinder M10 x 1 and M12 x There is a M10 x 1 thread on the brake caliper. I'm pointing that out because nowhere is the listing warning the customer of the thread pitch differences between the Banjo Bolts.
There is a dual piston caliper on this vehicle.
Selected User Reviews For Rear Foot Disc Brake Master Cylinder Assembly with Oiler Replacement for 110cc 125cc 150cc 200cc 250cc ATV Quad Dune Buggy
I used M8 bolts on the caliper. Those are the two I bought. Use reverse bleeding process to restore brake fluid after flipping the bleeder and removing the banjo bolt ends. On the right side of the two-wheel drive go kart, the hoses need to be routed differently compared to the left side. The full installation hasn't been tested yet. I'm not sure if the pads retract completely.
The claim is that it is fully assembled. Unfortunately, this isn't the case. There is a missing snap ring on the brake pad pin, which is a hard thing to spot As I didn't have a snap ring, I drilled a hole in the pin and added the cotter pin you see in the photo. A safety issue like this cannot be reviewed in a flexible fashion. It would have gotten 5 stars as far as quality and price if this had not been the case.
I placed an order for a 2011 Taotao ATA-51 replacement part and everything has worked out perfectly A 250-word response A four-wheeled ATV with a C engine. This was a good value because it came with the reservoir, the break line, a master cylinder, a wheel cylinder, pre-installed brake pads, and an extra set. A full container of fluid was also included and it was already bled and prepared for In fact, I had to change the rod from the pedal to the mastet cylinder because the one that came with it was too short to be of any use.
From what I read, it's poor The quality of what you buy is what you get. When I applied the brake line to my Taotao 150cc, it was upside down and backwards. The bracket did not come with two mounting bolts. An missing safety pin makes the system inoperable. It is not possible to operate the master cylinder pump. I tried bleed for air after pump started rising and falling, but it didn't engage the brakes, and after bled the line for air, it would not work.
Having just repaired the brakes on my Go Kart, I got this brake system just in time for another project. So glad to have it available--might as well use it for another project as well. The quality of the system appears to be the same as more expensive.
We adapted it to work with an old mechanical foot brake on a go-kart. I love how well this works. Braking power is very good and brake feel is really good as well. I am very happy with my.