Omonic 10 Pack Rubber Well Nuts with M4 M5 M6 Brass Insert 4mm 5mm 6mm Metric Wellnuts Motorcycle Windscreen
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It has a 39-inch display
In response to the first question, yes.
The bolts must be purchased separately. You will only be receiving the nuts.
The stock screws will work, but you will have to compress them slightly to enable the threads to reach due to their length.
Selected User Reviews For Omonic 10 Pack Rubber Well Nuts with M4 M5 M6 Brass Insert 4mm 5mm 6mm Metric Wellnuts Motorcycle Windscreen
This type of attachment is very effective for the intended purpose of connecting a threaded connection to a fiberglass or similar depth To try and use these for a different type of material, porcelain and to attach a toilet seat attachment (2) to a failed insert, my results have been less than satisfactory. I believe the hole material needs to be much thinner so that the rubber portion of this well nut can bunch up and grab the backing side of the hole from behind. estimate that 1/4" to 1/2 inch is the maximum. The rest of the time, these can be a great life saver if used.
If you are looking for motorcycle safety nuts, what I found is that the nut was too deep in the rubber for the little bolt to reach, although this may differ from your experience.
Please correct it. Please be aware that the length of the M6 item specified on the spec sheet is incorrect. The height is listed as 16mm, which is what I need I received one that is 21mm in diameter. It may not seem like much, but with my application (Ducati 907ie fairing), the bolt will not reach as far as I need. Bolts should not have to be longer, but I could get longer bolts if need be.
I used a 19/64 drill bit to fit it I received two duds in the package, but I still think this is an amazing product. I highly recommend this product beyond all doubt.
Quality is very good, but the dimensions are not correct. A description on the order form suggested that I order M5 Rubber Well Nuts. A height of The barrel diameter of the 89mm gun is The diameter of the cylinder is 53mm. The height of the fish is 27mm
Fl. This is what I received 02mm
Unfortunately, I did not receive accurate information A height of The diameter of the head is too small (only 9mm) The diameter of this screen is 7mm (too small)
Similar dimensions OK, maybe that isn't a big deal for your application, but the specs listed are what I needed, and they didn't meet my expectations. Probably a better idea if they just didn't list the features and specs, especially if all of them aren't even close to what they claim to be.
I replaced four wellnuts that were facing failure The windscreens on my motorcycle are held in place by these. These OEM ones lasted about eight years, it will take time to determine if they will last as long.
You can buy them for a low price. The result I was looking for. To replace the captured nuts on my motorcycle windshield mount (KTM 990), I had to obtain new ones. For the same price as two from the stolen ship, you could buy this ten-pack. I appreciate it!.
If you need spares, make sure to have them on hand since Amazon makes it affordable a wide variety of options! A good price for a good product.