SPAUTO UTV Rear View Mirror - High Impact ABS Housing and Multi Clamps with Shatter-Proof Tempered Glass Mirror for Polaris Ranger, RZR, Rhino, Honda Offroad Center Mirrors

This mirror set is a good attempt with generally good materials, but it has a fatal design flaw from the start. There is a bracket that attaches to the utv's frame. The mirror is attached to this bracket by a hub that can be rotated to adjust the mirror's vertical position. A 5mm bolt screws into a brass nut with splines to hold this hub to the bracket. The splines on this brass nut are embedded in the hub's plastic, and when the bolt is tightened, the hub is snugged against the bracket in the desired position. The flaw is that the brass nut does not stay in the hub, allowing the entire mirror to fall off the bracket. I almost returned the mirrors, but I needed them, so I glued the brass nut into the hub with epoxy. So far, it's worked, but it shouldn't have to be.

Castiel Maddox

| Aug 24, 2021

6" is a little loose, but it's easy to adjust. These mirrors have a great look to them and a fantastic price. Even with the tubing wrapped in the included spacer wrap, getting to the 1. The fit is too loose on the 6" adapter. I ended up wrapping the roll cage bar with 6 or so wraps of gorilla tape before using the included rubber spacer wrap to achieve the desired tightness. Even with this minor modification, the screws were a little short for the space available, but skipping one of the washers was enough to secure it. br>br>I was a little disappointed that, while the mirrors' side-to-side adjustment is excellent, the up/down tilt of the mirrors on the ball joint is not. Before installing, I'd suggest experimenting with the install height to ensure you can adjust it where you need it. br>br>Overall, a great deal for the money; just be prepared to put in a little extra effort for installation on the limited range of tubing diameters stated.

Dakari Coffey

| Mar 06, 2021

These were purchased for Teryx and are a close fit. There were two brackets for mounting them on the UTV, neither of which worked well. Even with both spacers in place, one was a little too small and the other was a little too big. They're nice-looking mirrors that work well on the Teryx, but they're a pain to put on. It would be so much better if the brackets had a different way of putting the bolts in. br>To properly tighten the bracket, Hubby had to drill the holes a little larger. br>A good mirror, and one that we hope will last a long time, but they shouldn't be too difficult to install.

Rocco White

| Jul 08, 2021

I was able to mount these to the brush guard of my John Deere 1025R and see behind me while backing up because I had the option of using two different size mounts. I couldn't find any other mirrors without installing them in the body or the loader, which I don't use unless I'm using a bucket or grapple. The various options for customization were extremely helpful.

Malcolm Turner

| Jun 14, 2021

The mirrors both broke while the UTV was parked in my yard; the glass is paper thin, and I believe the expansion of the plastic housing in the sun, followed by cooling during a recent sudden blizzard, caused the glass to shatter when the housing shrank. It was my fault for thinking that expecting a set of $25 mirrors would be a good idea. They are not worth your time.

Emmanuel Bautista

| Apr 08, 2021

I just finished installing the driver's side and will not be installing the passenger's. Although I used a thicker rubber spacer, the 75" clamp was too loose. I had to use Gorilla Tape, a thinner rubber spacer, and a lot of patience. The amount of tape used was crucial; too much tape prevents the bolt and nut from attaching, while too little tape causes the bolt and nut to become loose. On a 2018 Honda Pioneer 500, it appeared to be very nice once installed. It will be interesting to see how long this lasts.

Ellis Ferguson

| Apr 10, 2021

Despite the fact that these are listed as fitting 1, they are not. 6 - The 2 inch clamp was too large for my Kawasaki Mule Pro FX, which has 0 inch roll bars. Even with both rubber shims and the 1. 75-inch shims, 875" roll bars can be achieved. The clamp was only 75 inches long, which was insufficient. The mirrors arrived on September 28, but I wasn't able to install them until December, which was after the return period had ended. The installation instructions state that I will receive excellent customer service if I contact them directly; however, I emailed them 5 days ago and have yet to hear back.

Miranda Valdez

| Aug 28, 2021

I paid $50 for a 1/2'' blemish right where it distorts my vision. 00 to have them installed because when I bought my Mule, it came with a fully installed windshield that had to be removed in order to install mirror brackets. I would be happy to return the mirror if they would just exchange the driver's mirror, no brackets or anything else, and then it would all be (5) Stars because they would be!.

Hunter Powell

| May 08, 2021