OPT7 48" Redline LED Tailgate Light Bar - TriCore LED - Weatherproof Rigid Aluminum No-Drill Install - Full Featured Reverse Running Brake Turn Signal
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
For a full-size bed, 60" is the size Across the board, the pick up is too big for a 50 inch. You'd do better with a 40 inch.
Dear Sir or Madam, Thank you very much If you are planning to open the tailgate, you should measure the length of your tailgate and make sure the bar has enough clearance. In addition to the bar, you would also need to make sure it wouldn't cause any other obstructions after installation (such as to the access to a spare tire). your tailgate is about 60" long and no obstruction would result in the bar fitting then it should work.
You made the right choice by shopping at You should be able to install this product on your vehicle since it is compatible with most models. To be safe, you should always measure your tailgate to ensure that the size that you need is correct. )Please feel free to ask any other questions you may have. I hope your day is great!
This LED tail light bar will fit any truck which has a tailgate measuring at least 48 inches wide. This LED tail light bar is installed below the tailgate, so as long as the mounting surface makes it possible for this to fit, it should work. My first LED tailgate light bar, with a very high quality, is the best I have seen.
Selected User Reviews For OPT7 48" Redline LED Tailgate Light Bar - TriCore LED - Weatherproof Rigid Aluminum No-Drill Install - Full Featured Reverse Running Brake Turn Signal
Installed this light just now, and it's really nice to see the quality packaging. The last seven months have been devoted to installing the 60" light You need to use the metal tabs which go into the truck in order to affix the eighth inch on both ends to your vehicle. If you do not use the metal tabs, your vehicle may not be able to affix. To attach the truck to my flat black flat rubber strips, I personally used that technique. I opened the adhesive promoter packet and it was pretty dry. I don't know if the smell was paint thinner. It would be best if you bought a tube of die electric grease and spread it on your 4 way plug, unless the wires are hard-wired. Generally the light was plugged in and tested and is working perfectly so far. It's been several hours since I purchased it and I hope it lasts as long as I own it. appears to be very nice! As of 7-7-2014, the light appears to be really bright. My light burned on the right half of the fixture in 2018. I contacted customer support and they are now arranging to swap it out. We hope that the next one will be longer than 7 months - Update as of MAY 29th 2019 the company has sent me a defective part right out of the box again, so far I have emailed them twice and have not heard from them. In the email, I also sent a video image of the issue with the light. am on my fourth light just to send it back and get a light that has quality issues, and I keep blowing a fuse every time I use my trailer, and yes, I had a trailer business check the wiring and they said might have had issues with your purchase, but I'm not a fan of this product. I plan on buying a LED light from the MICTUNING brand and seeing how it goes.
I mounted it on my 2003 Silverado because it is very nice. As a result of my stupid mistake, I accidentally mounted the bar upside down without noticing the small print. This idiot is a complete fool. The only other problem was that when my left signal was on, the right signal would flash as well. This is an easy Earlier this year, I bought a pair of two-way headphones I just cut and switched the two signal wires on the six-way trailer harness splitter where the light bar plugs in, and the wires ran to the light bar. The problem has been resolved. My light bar and orignal trailer harness did not need to be modified in the least. It was sticking to the wall like glue, so there was no way I could remove it. If I install something again, I'll slow down and avoid doing it in the evening. There is no doubt that this LED light bar is bright, well made, and will work well. I like the solid construction of this.
This is why I believe that he will not be covered under warranty. You'll hear from me in the near future. A. LATEST UPDATE A representative of the company said I was out of warranty A company official has told me that I can write a review and send them a screen shot of such an evaluation (implied to be a good one? 1) THEY WOULD SEND ME ANOTHER LIGHT TRACK WENT FOR AN INSTALLATION OF THE NEW LIGHT STRIP THE LIGHT STRIP ON THE DRIVER'S SIDE WOULD GO OUT WHEN I PUT THE BRAKE ON I contacted the company and they sent me another light strip WENT AHEAD AND INSTALLED IT The light strip on the driver's side of the car went out when I turned the blinker on. I recently had two of those defective light strips installed within a period of about three or four weeks. ITEM IS DEFECTIVE ON BOTH SIDE. I WISH YOU WOULD STOP BEFORE buying this product and consider what I am going through. I am going to start with my initial review
I live in Michigan, so we have a very cold winter. The strength and durability of these will be tested over time and under the rigors of an MICHIGANE The only thing I can say so far is that installing the light was a breeze and it is bright and nice. The only thing that I didn't particularly enjoy about this light bar was that it came both with adhesive backs and metal clips. My favorite thing about the METAL CLIP METHOD is the powerful blowers at our local car wash. In any event, it would have been nice if the seller/manufacturer had included four metal screws in order to attach the metal clips. I had a separate trip to the Hardware Store to obtain four small metal screws, which were sold separately. I am just mentioning this because it is such a small item and I feel that it should have been included.
The best quality you can get Everything seems to be working fine. My original purchase of this OPT7 led tail gate bar for my 2006 Ram 1500 was made in October of 2016. I purchased the bar on 12/15/2018, almost 2 years later. As a result of selling that truck in December of 2016, I purchased a 2012 Ram R/T and I was able to peel the 3m tape off the OPT7 LED bar, then reapply the bar to my new truck with the original 3m tape. The LED bar has survived three harsh Philadelphia winters, crazy rain, snow, ice, cold temperatures, and more. The LEDs work properly, and the rest of the system runs as it should. There is no end to what this thing has done for me. It would be hard to find a better led bar to recommend than this. It seems unreal that this brake has lasted 3 winters now on 2 different trucks. I have included the last four pictures so you can see how the truck looks after it has gone through 3 N and after being moved. The winter season. This OPT7 LED Light Bar for your Tail Gate is amazing quality. ***** MY ORIGINAL REVIEW ****
This product is truly one of a kind. It wasn't taped very well), but the led bar was inside a box that was then surrounded by a hard cardboard tube and My jaw dropped when I saw how tightly the shipping box was packed, I think it would survive a bomb or blast. I was amazed at how many layers were attached to protect the product. . . . and now for the product. I installed this in my 2006 Dodge Ram 1500 Quad Cab 5. 0. An all-new 7L Hemi engine. I found the installation to be very easy. Like they mentioned, it is ready to plug into the 4 pin trailer harness of your truck. With rubbing alcohol, I just cleaned the bottom of my tailgate where the led bar was going to be fixed and then stuck a 3m tape to it. Although I didn't hardwire the reverse lights as I don't want to hardwire anything in my new truck, all of the other LED lights worked and lit up as they should. The 3m tape has held up so far (4 days) and I will update if it starts to peel. The three pictures that I included are below. First, the lights are bright even when being exposed to direct sunlight during the day. Under regular running position, you can see the led bar lit up at night in the second picture. In the third image, you can see the led bar with the brakes applied at night. In the end, I would definitely buy an OPT7 product again based on the fact the package was so well protected during shipping. The shipping/packaging was A+++, AS was the quality of the product, B+ was the difficulty of fitting (hardwire reverse lights), and the overall experience was A+++. I would order from OPT7.