Nilight 2PCS 60Inch RGB Truck Bed Light Strip Kit 180 LED RF Remote Control with On Off Switch Blade Fuse 2Way Splitter Extension Cable for Cargo Pickup Truck SUV RV Boat, 2 Years Warranty (TL-31)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The generator can be directly connected to the wall if it has a 12 volt output (some models have this). You might be able to power the LED lights with a 12 volt power supply or battery charger if you don't have one.
There are tines on them, but otherwise they are
As long as you have a battery for power, you should be fine as long as you connect it to a charger. You can also turn the power on and off with the power button. You should be able to find a small 12 volt battery to connect if you find a small battery for the light.
In truth, there is no such thing. There are many cheap sets like this one. The end result was that I returned them, it was just a waste of time. A nice set from Diode Dynamics, but be prepared to spend a lot, since it is cheap but I would not recommend it.
Selected User Reviews For Nilight 2PCS 60Inch RGB Truck Bed Light Strip Kit 180 LED RF Remote Control with On Off Switch Blade Fuse 2Way Splitter Extension Cable for Cargo Pickup Truck SUV RV Boat, 2 Years Warranty (TL-31)
However, once I opened it up and saw the quality of materials used to make the LED strips, I was blown away. In less than 3 hours, I completed my bed light project. The only thing I had to add to the materials I received was more wiring. I didn't have enough wire to reach the switch I needed on the interior dash of my 2015 Tacoma, where I wanted to put the switch to operate my lights, with the material that came with the kit. Nevertheless, when I put the switch where I wanted it, it was my choice. The light kit is a total hit with me, and I am beyond happy with it! I have shown it to several friends and they are all This is a great bed light kit that I recommend to everyone who wants one.
It's getting lighter. My utilitrack rails were very easy to mount the lights on. After that, I mounted the lights to the bottom. It is designed to allow a lot of light to be directed downward, but there is enough reflection when the sun goes down to light up the whole bed. Wires come with plenty of it, however, I ended up cutting out a good portion of the wire on the front driver side, and splicing it into the passenger side which was longer, although still too short to reach the front driver side where everything is mounted. The bottom line is that if you have some basic electrical soldering skills, this should work well for you. Obviously it will void the warranty, but do try everything first and you should be fine. It will take some time to see if the adhesive will last, but clean everything well with alcohol first. I saved the clips just in case I need to screw in anything else. Each length had to be shortened by a foot as well. It only took one straight cut with a razor blade directed straight at the area of cutting. I see no reason not to buy it for $20.
Nevertheless, I did install them in my 7x16' enclosed cargo trailer & find them to be quite reliable They are good at what they do. Overall happy with the purchase. I have a few concerns regarding the adhesive LED strip, wondering how long it'll last & Stick to it. It sounds like I will have no problems, but I hope it is true! The price is definitely worth it. Perhaps I will buy another set of these if they.
This is a very bright material that is easy to trim to the right It's not too expensive. There is no good wiring harness for the intended use that comes with the product. There is no difference in the length of the wire found between the two strips. It would take me a long time to run the passenger side light strip back to the switch if you pick up the power and place the switch on one side. The other side is 3 feet too short, so I had to splice and solder extra length to make it possible. Unlike a car bed, this is intended for a truck bed, so the same issue will apply to the majority of people. In response to my email, the manufacturer asked for a screen shot of the order so I could determine how long the strip should be trimmed to. After I sent it, I did not hear back from them. You can immediately cut to length if you need to if there is a clearly marked cut line. I. 1. As soon as it is installed, the product is great
2. There is a problem with the wiring harness. 4. If you need help, you should not depend on customer support. In the event that I had the choice again, I would purchase another product.
It came with a great package of hardware and the lights were top notch. Ideally, I would have liked them to be rated IP68, however, for the price and where I placed them, they should not be needed to be fully waterproof. However, anyone can get by with the included hardware even though I used my own connectors for the wires. Kits like this one are a great value, as everything you need is included.
A battery-powered device was previously in use by me Powered the truck bed light on a company truck by Access. Even though the light strip is only 12 inches, it was easy to install in just five minutes. As soon as I bought a new company truck, I decided to decide for myself if this hard-wired kit was really worth it, and I'll be honest with you, Construction is of a high standard I was very happy with the quality of these wires. The gauge is a heavier gauge and they are The ends of the rope are tied into the back of the 7-foot There was no need to run wires all the way to the battery with the 4-pin trailer connector. I am amazed at how bright these lights are! It took me one hour to complete the installation. These will be installed in all my trucks in the near future! The difference between the 12" Access strip and the over 8' Total Light is only $1. 79.
Should read bought two LED light strips to install in my camper shell, located on the bed of my pickup truck I love how bright they are! In the event of a pickup with a camper shell (cap), one light would have been more than bright enough. The only wish I would have made is to buy only one strip instead of two, but I'm still very happy with this purchase. It will be interesting to see how long they last.
These lights turned out to be very straightforward Despite the fact that I am a woman and have never added lights to a pickup bed, my teenage son and I were able to do this together. If you have a camper shell on the pickup bed, then it is hard to see without additional lighting. There are two strips in this set and they are bright and functional. Extension wires come with the set, but they're very thin and not very long. (I think they're around six feet or two meters long. ) The bed under the camper shell would probably work as long as it were connected to other lights that were already installed inside. However, I had no other lights installed in my truck, so the wire had to be run directly to the battery under it. The wire I used for this was purchased from a spool. Also included in this set is a fuse in a fuse holder that is installed in the on/off switch circuitry. Extension wires are needed to connect the battery or power source to the extension wire. The wire we used was 14 ga. It was heavier than necessary, but it worked. There isn't much to it when it comes to setting up the lights. It is easy to attach the lights to the camper with an adhesive on the back of the lights, but it is also recommended to use the brackets included with the kit. There is another set of three lights like these that we intend to install in an enclosed cargo trailer using a separate battery within This light is very functional and comes at a great price. It looks well made. A quality product that will last for a long time. The one system sold for around $10 by another company looked so flimsy to me A strip of tape attached with tiny LED lights is not much more than that. This was a great purchase for me.