* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More

3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More

3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More
$ 33.00

Score By Feature

Based on 2,413 ratings
Adhesion
8.68
Easy to use
8.71
Value for money
8.69
Stretch
7.78

OveReview Final Score

How Our Score Is Calculated

Product Description

The maximum width is 5 mm (1/8 in nominal)
This tape can be used for most wrapping applications. It conforms to bumpers, door handles, mirrors, etc.
It is important to use transparent tape so you can see exactly where your line is and reposition the cut line accordingly.
There is no residue at all!
Turns and corners are made easier with this wheel.

Questions & Answers

If you could explain to me how to apply and use this tape, I would be very grateful. It is better to begin with the tape or the vinyl The vinil can be seen through, but how can I see through it. ?

Putting down the tape is the first step, then covering it with vinyl. Vinyl is clear enough to allow you to see the tape outline. don't have experience with it you'll need to practice on scrap so you can get a feel for it. Around 2.30 is the end of the tape when you run it. Take your tool and extend it 3 inches beyond the piece you are attempting to cut, then pull it straight back 180 degrees across the piece Once you get the cut started, it's not hard.

Is it possible to cut through two layers of ORACAL 951 at the same time?

2 layers of 3M 1080 are cut with this machine. Do not have the ORACAL 951 program.

Lines in my tape don't look smooth, like every foot or so there is a twist in it. How do I know if my product is bad?

A smooth wind should be achieved when winding the roll. This has never happened to me when I have used a lot of rolls

Could this technique also be used on paint protection film?

It is usually installed wet with Paint Protection Film since it is thicker. Installing the wrap material dry is the only way to accomplish this.

Selected User Reviews For 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More

I like that I can move the vinyl over it and it will stay in place
5/5

A lot of shelf life is a concern, so I had let some from a different brand sit out (apparently the shelf life is a concern), and this brand was excellent. Since I've never wrapped anything before and I'm inexperienced with paint or body work as well, it seems reasonable to assume that most anyone could successfully wrap an item as well. The only side effect was that on reasonably sharp turns, the filament would come out of the tape a little bit, and depending on how much or how little that was, it could be a It was not too difficult for me to reposition it by hand most of the time and it would more or less stay in place. When the tape part is wound around a sharp corner, for example, the inner perimeter might wrinkle but as the filament was released, it remained smooth almost all the way to the cutting edge. First off, I covered both a trunk and hood using this and vinyl wrap, which, (at least for me) meant a lot of repositioning of the vinyl. However, the knifeless tape did not come up as it should have, and the vinyl wrap fit well enough. Several people have suggested that you need to leave yourself plenty of slack to begin the cut. For some reasons I didn't leave myself enough slack, combined with some difficult spots, which made things more difficult than they needed I suppose that we all learn from our mistakes. As you can see in the photos, the hood slopes down at the end, so it looks crooked, but it isn't straight from the side. From a distance, you can see that the curved corners aren't entirely reputable, but an entire level away, I don't think they're I have separated the vinyl from the carbon fiber hood in order to make it clearer. The white part is vinyl that I laid down, cut, and then glued. Creating a reverse stencil sort of came naturally to me. It's not that risky, the worst that could happen is that you buy another sheet of vinyl after you test this out. This isn't that big of a.

Karsyn Levy
Karsyn Levy
| Jul 08, 2021
I doubt this product will make clean lines, for a product that claims to make them
3/5

The vinyl I purchased last week was for my first attempt at wrapping. I bought this to assist If the string is not straight and smooth, I can't see how this will make a clean cut in my vinyls. In every foot or so, there are twists and turns. Trying to cut sushi with a serrated bread knife is like trying to cut sushi. I don't intend to attempt it and risk destroying 3M has been a good product for me.

Layne Lamb
Layne Lamb
| Dec 17, 2020
I received a defective item
3/5

The filament did not run perfectly straight down the center of the tape. To cut accurately, you need straight, accurate filament running down the center. There was nothing wrong with the roll I got. When I returned it, I was sent a new one quickly and it was just as good as the first one. A quality control specialist needs to apply for a new position.

Saint Ryan
Saint Ryan
| Feb 19, 2021
A vinyl record from VViViD is awesome
5/5

This is a great product. What a great knifeless tape this is. It has a very straight edge and can be used without any problems. It has been a pleasure to do business with VViViD and their quality has been excellent. This is a selection of some of the items I wrapped for Their services are of the highest quality.

Griffin Bryant
Griffin Bryant
| Oct 16, 2020
Since sliced bread, it's the best thing ever
5/5

The tape you use to make vinyl cuts makes the job so much simpler. It can be difficult to get the string to run through the center of the tape, but it's super easy to apply and will yield the sharpest cuts on vinyl. You can figure it out by watching videos on how to apply it.

Turner Kerr
Turner Kerr
| May 10, 2021
This will not work for cast or calendered vinyl that doesn't have that much thickness
3/5

I ordered this a few days ago to cut around some door handle insets when I was doing some vehicle graphics, and it didn't work. The irregular cuts occurred when I used another brand before, and I assumed it was the brand that caused the problem, which is why I went with 3M. It took me some time to apply it to the panel and overlay the graphics. I used a heat gun to set the graphics against the panel before pulling the line. When I pulled the line it cut through the vinyl but was not Despite the line not being straight, it There is a chance that this will work with automotive vinyl wrap, which is thicker than cast sign vinyl, and would give maybe a better cut line, but don't be fooled into thinking that it will give you the same clean lines as In the end, I used this as a backer before cutting the vinyl with a razor in order to keep the razor from cutting through In terms of results, there was no comparison between the two methods.

Renata Larson
Renata Larson
| Feb 01, 2021
Overall, I am very happy with this product, and it has been very easy to use
5/5

The knifeless tape didn't occur to me until I discovered it could be used to wrap any part of my car. It is well worth your money to purchase this tape. The product is very easy to use and I am extremely pleased with it. However, you need to practice until you get the hang of how to start the wire at It wasn't until I did some research on how to use the tape properly that I wasted a lot of time. It is impossible for me to describe enough the wonders of this Before you start practicing, make sure you are familiar with the instrument!.

Khari Hogan
Khari Hogan
| Jun 23, 2021
It's time to get serious about trimming vinyl with this tool
5/5

This stuff allows you to finish some really impressive vinyl trimming. You should watch YouTube videos to learn how to pull the wire so you can cut the vinyl.

Melina Hall
Melina Hall
| Jun 09, 2021

Related Products For 3M Knifeless Finish Line Vinyl Wrap Cutting Tape 50 Meter Roll (164 Ft) for Stripes and More