UnderCover SwingCase Truck Bed Storage Box | SC203D | Fits 2015 - 2020 Ford F-150 Drivers Side

This is for my 2018 Raptor after I realized it has a relatively small amount of compartmentalized storage despite being a huge truck. In exchange for the luxury of the truck in which I spent a great deal of money, I don't want anything rattling around in the cabin or bed except for The SuperCrew was a great solution for my need for storage for small and medium items, but I didn't want to sacrifice the valuable floor deck space that it provides by adding an under-bed storage solution There is a storage compartment under the seat. It works perfectly. Thanks, TLDR. Anyone who doesn't like their stuff rolling around in the cabin or rattling around in the bed should check this out. Designed to work with Ford OEM tonneau covers. It was easy to install the program. A scredriver equipped with a T10 torx bit could theoretically be used to do all this with one adjustable wrench. For your convenience, you might want to purchase a wrench set with enclosed heads that can bend at 30 degrees (so you can reach inside the tail light cavity and hold the nuts in place) and a drill accessory. This will take you about 15 minutes to install once you know what to do. It does not require any modifications to your truck. A good mounting solution is a solid piece of equipment that leaves one feeling confident. Normally, I think of ABS as being cheap). In spite of being fully stuffed, the container locks into place firmly and opens smoothly. Using the lock setup is also very easy, as you get a positive click when opening and closing it. Due to the simplistic construction of the unit and parts, it appears to be a $150 item, but it serves a very important purpose and is worth $200. The functionality is what I liked most about it, as I found more space than I had expected. In addition to a large tongue, ratchet straps, screwdriver and hex wrench sets, flares, and WD-40, I was able to find an extension cord and a large tow tongue. A small fire extinguisher and other items can still be fitted in, as well as a 40, mini sledge, and so on. With one each on either side of the bed, you would have a substantial amount of storage space that is out of the way and doesn't obstruct the use of the bed at all. Whenever you need to remove the SwingCase so that the bed is as spacious as possible, simply release the latch and lift. You need 5 seconds to do it. This swingcase locks up nice and solid when it's stowed, and they cut the release lever off-center so it'll be easier to access. As you pull it, you are applying a torque that naturally makes the case swing The swing cannot be 180 degrees because it is attached to a bed support cable, but it can still swing far enough so it gives enough convenience. NOTE FOR BUYERS OF OEM Ford tonneau covers.

*For use with original Ford tonneau covers. A concern that I had was that the SwingCase might get in the way of the latch lever that holds down the tonneau cover. Due to the way our Ford's design works, the spring tension can allow the lever to move out of the way while still keeping the cover in place. This even adds a little spring tension against the SwingCase to make sure it swings I have no issues with this.

Westin Rubio

| Nov 09, 2020

My 2016 f150 driver side box was the passenger side box from a Toyota tundra when I originally ordered the box for my f150. However, it was an amazing product besides that. With my tonneau cover on, it works great. Also, I have a drop in bed liner, and I had seen videos about removing huge sections of that liner, but I did not have to do that. The only sections that needed to be bolted in were those that I had cut out. This worked really well for me and I was extremely happy with it. There's only one thing out of the ordinary here (a torque bit I believe? Located in the directions section or aka the star part). Get it in one sitting so that you can complete the task In addition, I would like to point out Pickups with a button for a light in the bed of the bed should purchase the box on the passenger side. By doing so, you will cover up the light button on the driver's side of the car.

Evie West

| Jul 11, 2021

When you have any of these drop-offs, just take a LOT more time than the videos indicate on the YouTube channel. If your truck bed has a lining in it or a rug liner already installed. As well, the latch system needed more adjustment for it to be functioning It is a wonderful way to manage the data that I found out how it works some time ago. The engineering and manufacturing of this device are both excellent. Let yourself go at your own pace. The other suggestion is this. It will interfere with the ignition system if you install it on the driver's side of an F150 If the bed box is latched in place along the side of the bed, the light switch will be located in that corner. Although the driver side version was an inconvenience, I avoided it by returning it and replacing it with the passenger side version. The two sides cannot be switched. In many ways, they are mirror images of each other.

Shepard Johnston

| Apr 19, 2021

The idea is good, but there is work to be done! It's a lightweight tool box, so do not expect to stuff it with heavy tools. As I put my draw-out portion of my hitch in, I also put the draw-in part of the hitch in. It probably exceeded the limits of its safety features by not having a lock, jumper cables, or a small fire extinguisher. The bouncing that a truck does causes any heavy object that falls inside to bounce in the box and to knock loose the plastic clip that secures the release handle and spring on the outside. Having popped the clip out, you can pull out the handle and the only thing that keeps the box from swaying is the padlock that you are supposed to hang on the box It is therefore unlikely that you will be able to put a Using this box for jumper cables and a few tools is all it can handle without coming apart. If this box could prevent the rinky dink clip from popping out, then it would be a great tool for beginners! It worked well for two weeks, then I found that it was loose in my bed. I tried epoxy, but it did not stand the test of time. Yet again, thanks! It is hard for me to think of anything to do. forward! I've decided to get rid of this box and mount the bike on an aluminum bed rack. have the Better Built tower box mounted on the bed floor, but it is located in the same location as my previous tower. It is still possible to load sheets of drywall or plywood due to the 4' clearance. Purchasing it through Amazon for $118 was a great bargain, and it works without taking up much room in my bed. Packing it up with all the stuff I was afraid to put in the Undercover box gave me some peace of mind.

Bianca Dudley

| Feb 18, 2021

As everything went smoothly, I tried latching the box and it didn't latch. I did not find it to align with my 2018 Ford F-150 With the 5 1/2 ft bed, the 150 Super crew is a great truck. It took me some jerry-rigging to get the latch to work. On the bracket on the front end, holes were drilled to move the latch forward and spacers were added to move it away from the side of the bed - it worked perfectly! This can be done by following the steps below. I would have sent it back if I didn't have the tools to do You can see the photos here.

Brayden Crawford

| Mar 03, 2021