NPAUTO Trailer Clearance Lights Double Bullseye Amber & Red 10 LED Trailer Side Marker Light for Truck RV Boat Camper Trailers [7 Red & 7 Amber]
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Since the old lights came out of the center, as well as the old wires coming from the back, I can envision this as a challenge, since the old wires came out of one corner. Additionally, you can only install the light from the corner feed if it is flush.
I received wires that came out bottom center with slots all around the edges of my 12/19 light bulbs
I believe so. Screws are included so you can mount them on an
I received wires that came out bottom center with slots all around the edges of my 12/19 light bulbs
Selected User Reviews For NPAUTO Trailer Clearance Lights Double Bullseye Amber & Red 10 LED Trailer Side Marker Light for Truck RV Boat Camper Trailers [7 Red & 7 Amber]
There is something funny about seeing a red light with yellow led's on it. Since all I see when I look out of the RV are two black wires, so I have to turn the lights one way and then the other way if I want them to go on. Polarized leds are used in the Led. If you break one, you can replace it with a standard cover.
There is no correlation between these two. As a result, 4 completely unnecessary holes have been made in the top, sides, and bottom, which are a waste of space. I would tell the maker to choose which top is and not make access ports anywhere but at the bottom really, only have one in the middle or.
Actually the wire leads are only about 5 inches long, and the gauge of the wire seems to be about 20. The lead wires in my lights are very small and can't be used with the crimp on connectors I use, so I had to solder #18 pigtails to some of them to give me enough length to attach them to my main runs. Although most of my connectors are good down to #18, there were a couple of lights that connected intermittently. To ensure a good connection to these, I soldered 6" #18 pigtails to them as well. As an installation option, I recommend connecting a 6" extension of #18 to each lead if you purchase these.
In this case, the wires had a grommet running through the side of the trailer. As a result, the light was not flush with the side. My solution was to grind a hole in the back of the lights so they would fit flush, and I brought the hotwire in through the I put silicone sealer over the back of the light, hole, etc. I hope sealing up the back of the light does not create any issues. I drilled the screw holes in the lights out so that they would accept the larger nuts. There was no need for extra holes I am pretty satisfied with how things are at the moment.
The travel trailer is equipped with the kit. The replacement is almost exactly the same. I only disliked the wires that were visible in the bottom A new hole was drilled in the center of the base and wires were routed through it. The holes were sealed and the panel was There is no problem with LEDs. I tested the lights ahead of installation with a 9 volt battery. I am very happy with the.
I started a trend!
Check out this product and share it! This is an easy to install device you will not regret this purchase.
Skip. It was designed by someone who hasn't ever installed side markers before. Due to the LED and the price, I was very excited. The back of the side panels does not have an indentation to accept wires, and the wires exit from the side panel, not the To make them work, I had to take some serious cuts.
A nice and bright day. This is an easy to wire shelf. It has a lip around the side to guide wires so they do not get crushed when you tighten the screws. They are strong lights, but we will see how they hold up under broad day light.