SOUTHWEST WHEEL 4-Hole, 4" Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) for 1" Spindle

$ 31.99

Score By Feature

Based on 154 ratings

Easy to install

9.28

Value for money

9.12

OveReview Final Score

How Our Score Is Calculated

Product Description

The bearings used are TruRyde L44643 outer and inner bearings with 4 studs and a 4" bolt circle.

It also includes the TruRyde inner bearing, the outer bearing, the seal and the solid grease cap.

A BT8 spindle (1" OD) is required

The center of the hub is pre-raced, and all studs are 1/2"-20 with a yellow zinc plating finish.

Parts from TruRyde are produced by an ISO/TS-16949-registered factory to the highest automotive standard.

Questions & Answers

Would the folding trailers from harbor freight work with these?

It will work as long as it uses an inner and outer bearing of type L44643.

Do you have a castle nut and washer on the shaft?

As far as I remember, the castle nut and washer did not come with the unit. The rest of the documents were there too. At a good price, it was an excellent hub that I would definitely recommend. Please accept my sincere apologies.

I was wondering what size the id 3/4 axle x 4 3/4" long was. It does not have a Do you know anything about it?

The id of a bearing will equal the diameter of the axle if it has a 3/4 inch d. Please accept this as my sincere apology.

Can you tell me if these hubs are preassembled or pre-disassembled?

It is exactly how it appears in the picture

Selected User Reviews For SOUTHWEST WHEEL 4-Hole, 4" Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) for 1" Spindle

A 4 hole, 2,000 lb

4/5

Idler Hub with 4" Bolt Circles. My older lawn tractor could benefit from these, so I purchased them for that purpose. Although it wasn't exactly a match, it was close. Is there a reason why the dimensions were off or short by at least a quarter inch for my wheels Spinning wheels. As the bearing inside dimension was 1" and the spindle was 3/4", I used a piece of vinyl 1" x 3/4" tubing to make up the difference. It's a little too hard for me to achieve that. In order to mount rims and taller tires on the front of my other work lawn tractor, I did this. In other words, I was merely doing what I had to do, instead of To cut deeper by no more than , one side of the races in the hub would need to be cut. To use the other washer and seal, cut the other washer to 25 or 1/4 inch. (maybe more) I was thinking about swapping these new ones for the cheaper HF hubs, but that seal was for an odd off size axle shoulder and there was too much more work to do.

Fallon Hess

| Feb 17, 2021

I am very happy with the product and the vendor's assistance

5/5

These are the kind of trailer hitches I bought. When the package was opened, there was a hole in it and the hardware fell Replacing my hardware was immediately sent out by the vendor after I contacted them. We have had it installed for a while now and it has held up well and we have used the trailer regularly to its full.

Ahmed Marks

| Feb 10, 2021

I wasted a lot of time figuring out why the dust and grease caps were not fitting

3/5

Wasting time is a huge problem.

Oakleigh Avila

| Jun 28, 2021

The shaft length of your hub should be determined by the diameter of your hub

3/5

There seems to be a reasonable level of quality, but the width is a little underwhelming. It works, but the end of the slots is at the end of the lever.

Rylan Stark

| Sep 09, 2020

Grease / dust cap is a different size

3/5

Bearings should be put in a separate bag from the other hardware. Dust / grease cap is a different size. These can come in a paper bag, but they often get banged up when put in the same bag as lug nuts.

Livia Kennedy

| Jul 25, 2020

I was satisfied with the results

5/5

I had no trouble installing the parts because they were all properly dimensioned and tolerated, which made.

Ira GODDARD

| Jun 08, 2021

isn't as good as it could be

4/5

There is only one thing I don't like about the The hubs, axles, and parts were just thrown into a box and the labeled and sent out. While this is, in fact, just parts, it would have been nice to really have it packaged and not thrown around. Oh Despite that, everything was in working order and nothing seemed to be missing.