SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
A fully machined surface of 1 1/16" and a 1 1/4 weld end of 8"
In what ways does Dexter 8 differ from previous Dexters Does it matter? Those hubs and spindles worked perfectly if I was building a trailer, but I was building my own
All axles can be loaded as long as the total weight is 1000 lbs or less
Selected User Reviews For SOUTHWEST WHEEL 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub
Any light-duty trailer that has a bolt pattern that fits your wheel and can be welded on square and plumb should be able to use it. If you are using a 110v hobby welder, do not try welding it on.
In order to construct an axle for a log splitter, I was considering using a Harbor Freight trailer, ordering a custom-made axle, or fabricating an axle myself. As a result of cost, I decided to build my own spindle hubs once I found this Using this set, I'm not even close to the cost savings I'd get from making my own axle. Identifying the welding requirements would be a bit difficult, but almost any decent mig welder could Measure and align the spindles, then tack the spindle on the opposite ends. Be sure to check that the spindle is true and square just before starting to weld. If the spindle gets more than a little warm, hold it in place and don't melt. After welding, cleaning, and painting are finished, the hub assembly is easy. Remove the bearings, grease them, and install the hub. Place a new bearing in the rear hub area, then install a new dust cap and grease the rear hub area. It is best to use a press to seat the back dust cap evenly. It is also possible to seat the rear dust cap by hand, but this There isn't a lot of thickness to the cap. The hub goes on, the bearing is greased, the washer is tightened, the cotterpin is inserted, and the exterior dust cap is put on. I have finished! You can create custom axle assemblies over that process and it is an affordable option. The product will be used again in the future.
As a result of the lack of grease being able to push in between the bearings, and the particulates pushed out, bearings are likely to wear out faster. I believe it should be added as it is simple to add. It took me a while to drill and tap a hole to add one. A fair amount of dirt and burrs are present in the hub, something that would cause the bearings to fail, as well. When putting it together, make sure you clean it thoroughly.
When I built a small trailer for my 2002 Polaris Sportsman 500 HO, I knew from reviews that Southwest was a reliable supplier, but was pleasantly surprised to find how high quality some of the components were. This hub has been machined perfectly and the lug spacing is perfect. Top Grade Material, Close Tolerance, Easy to Fit and Weld First Class Craftsmanship Hub Assembly, everything needed for the axle end (except the tires) is included. Thanks to everyone who reviews the parts needed, and to Amazon for having such an outstanding vendor.
When I received the supply I did not find any nuts or cotter pins with We were not provided with a telephone number with our invoice. Having already welded both axles in this order, I had to do the rest by hand. It cost me an additional $6 to buy nuts and cotter pins.
These are being moved around the farm on a small trailer, so they will not be used near highways.
I really like it. There is no way to wear a dust cap. A major damage had been done to the dust cap while trying to install it. There's a serious problem with this kit, but it's still a very good one.