Dexter Axle Hub and Drum Kit (K08-247-94) For 3,500 lb. axle, 5 on 4.50 w/EZ Lube Cap

$ 103.42

Score By Feature

Based on 47 ratings

Customer service

9.06

Giftable

9.16

Value for money

9.51

Delivery

9.50

OveReview Final Score

How Our Score Is Calculated

Product Description

This is a genuine Dexter product!

Dexter 3 can be fitted with this kit. An electric or hydraulic brake option is available on all 5K EZ Lube Axles

With a drum size of 10" x 2-1/4", the width is 2-1/4". The lug pattern is 50 with 20 studs, 1/2" in diameter

Included in this kit are studs in the hub/drum, Grease Seals A 565"ODx1 size. "ID), L68149 Inner Bearing, L44649 Outer Bearing, Races, EZ Lube Grease Cap, Rubber Plug, Spindle Nut & Retainer, and

Questions & Answers

Do you have one? Do you have a pair of these?

There is only one hub included here.

The exact measurements I need to take to ensure this is an exact replacement for my Dexter 8-inch Do you know what the 247 hub is? In what way does the 5-point system work Is 50 the same as fifty?

There is an imaginary line circle that follows the stud spacing called the bolt CIRCLE. An issue with measuring a line that doesn't exist is that it is hard to get a precise measurement. Then you measure the distance between the centers of the studs. It will be about four inches in diameter if the hubs are 50 inches One stud center to center, 1 stud skipped)

What is the part number for the spindles used in the ?

There are a few styles of 3 that we carry. The spinning speed is 5K. A brake flange is on one and not on the other.

Are washers included in this setup or does one need to be purchased separately?

On request, this drum kit can be equipped with a spindle washer, but that is not included in the standard package.

Selected User Reviews For Dexter Axle Hub and Drum Kit (K08-247-94) For 3,500 lb. axle, 5 on 4.50 w/EZ Lube Cap

I was generally satisfied with the product, but the correct spindle nut and nut retainer did not match the EZ models Make sure to lube the axles

4/5

As a result of not receiving the EZ-Open, my kit was incomplete A lubricant should be applied to the It's 191 to If EZ-PASS is not available, please call ) or It measures 190-190 These products apply for categories with prices of $. 00), despite the fact that they are listed in the product description and As opposed to nuts and bolts, the kit included castellated nuts and cotter pins. As an emergency spare, this is a small inconvenience since I carry it on the road with my trailer and will re-install it when I get home As far as the nut and retainer is concerned, use them as they are. In the event that my existing nut and retainer are damaged, then the spindle is likely to be broken as well. In any case, I probably will not be able to install a new hub. The kit I received appears to be an authentic Dexter, which is something I definitely appreciate. A heavy plastic-wrapped piece of equipment is included With the races, bearings, and grease seal installed, the hub is ready for use. As far as we can tell, the bearings were pre-installed The surface was greased using a grease-free technique An emergency spare should do the trick as it is packed in a way that allows it to be quickly accessed in an emergency.

Liberty Washington

| Aug 28, 2020

Thanks for producing a high quality product! I replaced 4 brake assemblies and drums on my 16-foot Dexter dual axle 3500 each The originals from 2002 are all shown here

5/5

Since I bought it about 15 years ago, I have owned it. Seeing as how this trailer is on a job site for months, it is there always. There was a problem with the brakes, so the old ones had to go and new ones were installed. Rust sets in as it's generally left sitting for long periods of time. Considering the fact the drum is already assembled with a seal and inner bearing, I like that it comes that way. There was only a bit of grease on the spindle and the outer bearing to complete the job. There is no problem with the brakes anymore because all 4 wheels are functioning appropriately now. The OEM parts work well, and I am glad I got them at such a good price.