* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
XiKe 1 Set Fits 3/4 XiKe 1 Set Fits 3/4 XiKe 1 Set Fits 3/4 XiKe 1 Set Fits 3/4

XiKe 1 Set Fits 3/4" inch Axles Trailer Wheel Hub Kit, Include LM11949/LM11910 Bearings, 11174TB Seal and OD 1.78" Dust Cover and Cotter Pin.

XiKe 1 Set Fits 3/4 XiKe 1 Set Fits 3/4 XiKe 1 Set Fits 3/4 XiKe 1 Set Fits 3/4
$ 14.99

Score By Feature

Based on 295 ratings
Value for money
9.40
Delivery
9.47
Satisfaction
9.33
Packaging
9.16

OveReview Final Score

How Our Score Is Calculated

Product Description

By entering your model number, you can make sure that this fits.
✔ Bearings - 100% Size inspection for optimal assembly ✔ Bearings - 100% Size inspection for optimal assembly ?%9
Material: Chrome steel, which is both strong and long-lasting.
Seal - Double lips and a spring provide a good seal.
Guaranteed for 6 months with no questions asked replacement or refund.
Expert - In 1945, the first professional bearings were produced.

Questions & Answers

What is the best way to tell if this bearing will fit in my axle?

Examine the numbers on your current bearings. Call Dearer Axle and explain your situation; they will be able to assist you. If it's a low-cost trailer from Lowes, Home Depot, or Harbor Freight, chances are the bearings and hubs are metric, and the inner and outer bearing cones and cups are usually the same. Good luck!

How would you rate the load?

My own didn't.

What is the difference between this product and the $5 more expensive xike product? https: //www. amazon. com/gp/product/b076x5qzgk com/gp/product/b076x5qzgk com/gp/product/b ?

Although I can't tell the difference, I would order National brand bearings and seals online because they are of poor quality. When you're in a hurry, this will do the trick, but it won't last long.

How much torque should be applied to the bearing nut?

No torque is applied to spindle nuts. The nuts should be tightened until the hub rotates freely without resistance or there is no free play. Once the castle nut holes are lined up with the spindle hole, insert the cotter pin.

Selected User Reviews For XiKe 1 Set Fits 3/4" inch Axles Trailer Wheel Hub Kit, Include LM11949/LM11910 Bearings, 11174TB Seal and OD 1.78" Dust Cover and Cotter Pin.

Owners of CHINA trailers, take note! These are the bearings you'll need
4/5

This review is quite lengthy. br>br>I bought a XiKe bearing kit for my Northern Tool Ironton 4x8'ft trailer (CHINA Trailer in a Box). The harbor freight trailers are in the same boat. This is the kit to get if you have one of these trailers or if your bearings have the number 30205 on them. It's a spindle bearing kit with a diameter of 25mm. A traditional 1" spindle bearing kit should not be purchased. The oversea trailers use a 1" kit, which is slightly larger. br>br>My only gripe is that the manufacturer's photos show this kit with new metal dust caps with a removable rubber plug for inspection and a grease insert, but this kit did not come with that model of cap. That is why I gave it four stars. Customers expect to see images of the exact item they are purchasing. Allow them to have their desires! br>br>The packaging from the manufacturer was nice, and the bearings and races came in sealed bags. In my case, replacing the races, seals, and bearings was a breeze with the right tools. My old hubs and bearings, on the other hand, had never been damaged in the first place. Some people wait until their hubs are completely broken before maintaining them; DO NOT WAIT! Always start with a pre-workout routine. Check your trip! You have the ability to stop things from leaving you stranded. The replacement parts are identical to the originals in terms of fit and function. The original parts were most likely made by the same company. If one side of the brakes fails, buy the entire kit to replace the other side; this is the same principle as when replacing brakes. Pads are not replaced on one side only; both sides must be replaced. THEY ARE WAY TOO CHEAP, AND INSURANCE IS WAY TOO CHEAP! br>br>The only reason I replaced my old bearings was because the passenger wheel felt notchy when I spun the hub while lifting the trailer off the ground during a pre-trip inspection. inspection of the journey By this time, I had put about 10,000 miles on the trailer and was checking the wheels, tires, and bearings for wear and damage on a regular basis, as well as keeping the bearings greased. I dismantled everything and ran a thorough inspection, but everything appeared to be in good working order. I ordered this new kit because I didn't want to take any chances. I've only put a few hundred miles on the new bearings, so I'm not sure how long they'll last. In addition, I tow my trailer at extremely high speeds; The speed is clearly over 55 mph. MY FRIENDS, KEEP IT GREASY!.

Galilea Boyer
Galilea Boyer
| Jan 30, 2021
Perfect for a 4x8 trailer from Harbor Freight
5/5

This kit came with everything you'd need to replace bearings, grease seals, and dust caps on a Harbor Freight 4x8 trailer, except the grease. My trailer is the 1200 lb capacity model, not the super heavy duty, but it's my understanding that it'll work on both, as well as others with 25mm axles and the same wheels. It's a good set of bearings, and the trailer now glides along nicely. If this is your first time replacing bearings, don't skimp on the grease; they won't last long without it. Prior to installation, you must pack the bearings with it, and then I pack the hub cavity with a large handful of grease before sliding it back on the axle.

Damien Perry
Damien Perry
| Jun 20, 2021
Perfect fit, excellent quality, reasonable price, and exactly as described
5/5

I tried two other sources, but they were the wrong size, whereas these fit the harbor freight folding trailer perfectly.

Castiel Everett
Castiel Everett
| Apr 24, 2021
It's the perfect fit for my boat trailer, which has 1
5/5

Large grease seals and 016" spindles. The kit includes a grease cup as well as large and small grease seals. br>My particular setup necessitates the large seals, which I have previously had difficulty locating. br>Warm the hub after removing the old races and before replacing them. (Keep the races cool) If you do it this way, the races will fall into place naturally, and the job will be quick and simple. br>However, I recommend using cotter pins that are slightly larger than those included in the kit.

Emory READ
Emory READ
| Apr 07, 2021
It was the perfect fit
4/5

With the exception of the washers behind the nut, I had all of the parts I needed. The tab on the washers that came with the kit is a mystery to me. Before the night was out, I had the new bearings installed.

Kamari LAW
Kamari LAW
| Nov 08, 2021
I found an all-in-one pack that was half the price
4/5

I haven't tried them on yet to see how they wear, but they seem to be a good fit. The original bearings were in good shape; however, I had heard that they should be replaced over time, so I did so. The race fit was nearly identical to the first. The dust caps are tight, very tight, and required some bending to get into place; I kept my old ones just in case.

Laila Powell
Laila Powell
| Mar 23, 2021
My Chinese import trailer has "not so standard" hubs, so it's close but not quite there
4/5

axles . These were close, but not quite right. In the hub, one of the bearing races spun. The axles would spin with all of the bearings spinning as well. Nothing that a couple of center punches couldn't fix. It's not perfect, but it'll suffice for my trailer needs. Please keep in mind that these bearings are NOT defective; they are FINE and of high quality. These import axels aren't!.

Roberto Hahn
Roberto Hahn
| Apr 24, 2021
My trailer wheel is compatible with this product
5/5

This past summer, one of the wheels on my utility trailer failed, so I replaced both of them. I decided to replace the bearing because I still had a good wheel. This way, I'd have a spare. Although I have not yet run this wheel, the bearings were easily installed.

Adele Hester
Adele Hester
| Jul 05, 2021

Related Products For XiKe 1 Set Fits 3/4" inch Axles Trailer Wheel Hub Kit, Include LM11949/LM11910 Bearings, 11174TB Seal and OD 1.78" Dust Cover and Cotter Pin.