HYCLAT Red 2-4 Gauge 175 A Battery Quick Connect/Disconnect Wire Harness Electrical Motors Plug Connector Recovery Winch Trailer (4 Pack)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
We have 4 men and 4 women
A scribe tool or a hook is used to open the spring clips on underneath the connection pins. The spring clips are accessed from the side where the wire is not present by pressing the clip toward the ground and pulling the wire from the plug housing.
If the wires are from 2 to 4 ga., Energizer quick connectors come in different sizes. Yes, that would be correct.
As they are held together by friction, they can be plugged in and unplugged. There is a locking mechanism between the terminal and the plug.
Selected User Reviews For HYCLAT Red 2-4 Gauge 175 A Battery Quick Connect/Disconnect Wire Harness Electrical Motors Plug Connector Recovery Winch Trailer (4 Pack)
In a nutshell, With its solid connection, this plug can run a 12,000 pound winch when you connect or disconnect the two ins. It also has the ability to run a generator with a 15 amp output. The video shows how to run the winch with this connector. I would appreciate it if you could press the helpful button if this review was helpful.
An ad for a "four pack" can be found here. There are four red connectors, eight metal tabs, and four end caps shown in the listing. Images of four connectors can be seen in the photos. As you can see, it is not what you will receive. The box contains what appears to be a "4 Pack," but it In the first instance, I returned it assuming the mistake might have been made - This was not the case. This second box has exactly the same contents as the previous one. See for yourself what the description and photos mean. We'd appreciate it if you could just understand that you will only receive 2 connectors if you order this "four pack"! The seller is very dishonest and underhanded.
As a result, I was able to crimp ferules with an old "Anderson tool," which was used to build substations, and it worked fine with thick ferules, which maintained their shape while being crimped. To do the job properly, a solid crimping tool is needed. However, I cannot comment on the performance of the electrical system. There are no problems with the parts mating. It is ill-advised to place the tag line keeper on the cap because it is too short. Wire like that is cheap and could have been made more useful by adding two more inches.
There is little difference between what Warn uses in their winch kits and what Warn uses on its I don't think they're at all flimsy they look very beefy. Keep in mind that, to get a good crimp, a hydraulic crimper is needed. Otherwise, like some people on here said, the connectors will deform and the crimp will be an inadequate one. I have already ordered my second set of 4. I am very satisfied with it.
Thank you so much for making Amazon available. I got these plugs online. I'm amazed at how strong they are, and how durable they seem. The cables on one end of an electrical cord were cut off from the clamps and I connected one of the plugs to My battery plug is attached to the front bumper using one of the plugs. Since I now have my own jump starter system, I won't need to lift the hood of anyone's vehicle to start theirs. Similarly, I can plug my winch into the outlet. It's a great thing that these plugs exist. A heavy and thick duty material.
Although I prefer bigger than smaller, I would always rather go bigger. A soldering iron can be used to connect the pins. As soon as I tinned the cables and filled the pins with lead, I plunged the cables into them. It is very easy to plug and unplug these connectors, and they are capable of handling high currents.
Good disconnects for a battery line. I was able to connect to these well. It is very important that you watch the YouTube video showing how to properly crimp on the connectors and insert them in the housing if you have never done it before. The best method for installing them securely is to use a strong 30 amp crimper. Installation goes smoothly when the software is correctly installed.
Put a pair on my 12,000-lb winch lines, one on the winch itself, one on the lines, and a third on the lines so I can disconnect the winch Also, this gives the ability to make jumper cables (which I did with 25ft 2ga energizer cables) using the same connectors, so I am now able to jump my car without popping open the hood and run the winch from a battery with the cables.