BUNKER INDUST 50A 6-10 Gauge Battery Quick Connect Disconnect Wire Harness Plug Kit 4 Pcs Battery Cable Quick Connect Disconnect Plug for Winch Auto Car Trailer Driver Electrical Devices,Red

The product works well and is well constructed. An assembly manual that is more clear and comprehensive would be useful. The wire tip end of the housing is not shown in which direction it goes into the If the tip is examined closely, we can see that it has a hook at the end that clips onto a piece of metal inside In light of the reviews and a closer look at the wire tip, Grasp) the tip. Crimping the tip would be hard, as it would take a lot of pressure to collapse the wire hole well enough to hold a 10 AWG wire. If you screw up a crimp, it can be difficult to fix (as several reviews have indicated). You can solder your wire in by putting the tip in a vise, heating it with a propane torch, and securing it with a wire hook. The result is a fast, stable connection that is easy to reconnect and does not require much effort to disconnect (which is good). Great item! I love it!.

Brylee Everett

| Jan 13, 2021

As depicted on the website, the connector was of the ANCHI brand, but I received the ATEM POWER brand. It is not possible to connect both connectors together due to slight differences. There is no compatibility between the ANCHI "A" terminal lugs and the ATEM "S" terminal lugs. A large surface area diminished by this circumstance is of great concern for a high Amp draw. A message was sent to the seller, but no response was received. A refund will be issued by A 1 star rating has been given because the product description is inaccurate.

Zariah Mullen

| Jan 22, 2021

I wasn't able to keep my jumper cables attached during the day, and it was quite a hassle to attach and detach them. Quick-release clips are a great way to There is a noticeable improvement in the connection. Although they are easy to attach and remove, they are not going to come loose. The following three complaints have been received This is 1. There is no way to put the rubber dust cover (The connector is supposed to be covered when the plug is used velcro straps to hold them in place, which is awkward and ugly, but if it weren't covered, dust and mud would get in the connector. The second paragraph. The quality control process is as follows The contact on one of the four connectors did not have one of the metal tabs that are supposed to secure the plug. Only three of the connectors worked out of the box. Then I would be satisfied for my current demands, but it would be 1. 2. 3. Not a single instruction. At last, I found out how it worked Wire the contact cup with an insulating wire, then crimp or solder the wire to the contact, then place the contact into the plastic housing until the tab snaps into place.

Kylen Hebert

| Feb 05, 2021

I bought it so I could add a second battery to my This type of disconnect was used in a movie on YouTube. The youtube videos I found on youtube helped me figure out how to use the wire with 8 gauge. There are 4 disconnects included in the package (1 "joint" requires The laws of physics are universal, i. e. This is not male or female plugs. I did not use a crimper to attach the tips to the 8g wire. It was easy to push the tips into the disconnect, and the connect/disconnect has a nice solid click.

Lucca NICHOLLS

| Jul 29, 2021

In this review, we'll be talking about the "BUNKER INDUST Battery Quick Connect Disconnect Wire Harness Plug Kit 50A 6-Pack" A quick disconnect system for battery cables of 10 Gauge. This is what I bought to install in my home This is the line on my air conditioner's electric cooling fan. As a result, the previous plug went bad due to excessive heat. There is a problem with this plug The fan motor is rated for the power of the cooling fan and is holding up well It is not explained in the instructions how to connect the contacts inside the plug, but there is a You Tube video showing how to do so.

Mara Soto

| Nov 06, 2020

Classic VW bugs that have the battery situated under the rear seat are the perfect candidates for this solution. I ran cables to the battery and terminated them with these connectors to avoid having to remove the seat to access the battery.

Natalie Gill

| Nov 20, 2020

Also, it would be nice that the wires were not exposed during winterization. These connectors are the perfect size for wires with typical RV gauges. I do want to warn you however from the previous As I didn't have a blow torch or heavy-duty soldering iron to melt the wires to the contacts, I soldered them using my fingers instead. The extent of the problem was too great. The vice grip wrench and kung fu grip, however, will make the job easier. Defining themselves as one was natural. I really like how the connection and disconnection processes feel and function As a result, it holds firmly. This is why I recommend you save them.

Rodrigo Valdez

| Aug 22, 2020

My goal was to install a connection between my sailboat and the starting battery in my dinghy to charge a battery for the outboard motor. The battery from the dinghy used to need to be removed and lugged into the sailboat to be recharged, but now I can plug it directly into the main DC power on the boat in place of having to remove it. Once I watched a few videos explaining the process, I was able to put the pieces together pretty easily. You need to go watch the videos in order to figure out how to install the plugs since they come with no instructions. It is easy to connect and stay connected with them, but may be even more so to disconnect them. They work well with 10 ga wire into the sailboat from 6 ga wire in the dinghy. The price is excellent and I can highly recommend it.

Denisse GIBBONS

| Aug 31, 2020