Roadmaster RBK22 Mounting Bracket

$ 95.00

Score By Feature

Based on 249 ratings

Easy to install

9.18

Value for money

8.98

OveReview Final Score

How Our Score Is Calculated

Product Description

U.S.A. is the country of origin

The model number of this item is

The package dimensions of the item are 10 x 10 x 10 inches. The dimensions of the item are 0" long x 8" wide. The dimensions are 0" wide by 3" high. The height was zero inches

Weight of the item in the package is The weight was 0 pounds

Questions & Answers

What was the fitment of the rbk6 on the roadmaster chassis for Does the 40WD Rambler diesel pusher work?

According to the RBK6 manual, the 1998 Roadmaster chassis will fit it, but there is no guarantee. 2000 is the first year in which Roadmaster chassis have been proven to work with the RBK6. However, the components to which these brackets are attached rarely change. The same set of rules is often followed for 20 years. A Roadmaster chassis prior to 2000 has never been seen or confirmed by the factory. Please feel free to try it and return the item if it does not The Roadmaster brand of steering stabilizers, the RBK6 and REFLEX, can be found in the Pacific Northwest (not the model of chassis but the brand of steering stabilizers). RBK will make you one that does fit if this or any other RBK doesn't fit and add it to their fit guide. Just give them a call at 800-523-3915. I am 669. Call us at 9690 and we can schedule the installation.

Is this a fit for ?

You can fit it on your vehicle if it is powered by the Ford F53 chassis.

With a 2020 Thunder Hurricane 34r chassis, I have a F53 engine. How do I know if these brackets will fit my RV?

were to guess it should, but even so I would prefer to contact RoadMaster technical support so they can advise you on the correct part number the mounting brackets need to match your chassis mine is model 35S F53 2016, so it would be best to call them to find out.

Is the RBK22 compatible with the front end of the F53 and will it work with the rear end of the RSSA?

Find out how much weight your chassis can carry. A RBK 22 will fit any Ford F53 chassis with an unladen weight limit of less than 24,000 pounds. In cases where your chassis has a GVWR of 24k or 26, then you must use the RBK25 mounting bracket. For the Roadmaster Reflex steering stabilizer part number RSSA, use the mounting bracket that corresponds to your needs.

Selected User Reviews For Roadmaster RBK22 Mounting Bracket

You Can Do It! Although I was skeptical that there would be much improvement, there was a lot of improvement

5/5

This truck is a Winnebago diesel pusher, mounted on Freightliner wheels and powered by a 340 horsepower engine. In the past, we upgraded our shocks to blistering and noticed quite a bit of a summer of experiencing quite a bit of side to side movement on some winding roads, I thought it would be interesting to try the Roadmaster In order to install this device, a specific mounting hardware was required. It was easy to understand and the photos were helpful. A total of about an hour was taken to install the brackets and stabilizers. As a result, the ride was much more comfortable with less effort required at the In the past, there was noticeable side motion when there were cross winds. Driver fatigue is not enough to be a danger, but it contributes to it. As a result of the mounts and stabilizers, the amount of work required from the driver to maintain the vehicle in lane was only slight. Looking back, I wish I had upgraded four years ago with our brand-new coach when it was new! The coach has over 45,000 miles on it!.

Hadleigh Salinas

| Aug 18, 2021

The system does what it's supposed to

4/5

This post does not have much to say. RSSA steering stabilizer kit makes it easy to install the RSSA steer wheel, and it This is only a 4 because the installation instructions for Roadmaster are pretty poor. Their method of illustrating usually involves using images, which is a pretty good There are unfortunately not enough photos to reproduce well and many times they aren't taken at the right angle to make the particular installation step clear. It would be nice if someone could add drawings to the photos and if there were better technical.

Edith Good

| May 08, 2021

For installation, you will need a kit

5/5

In order to install the Roadmaster RSSA steering stabilizer on a 2013 Ford F53 24k chassis, I purchased the kit. Removing nuts from the rear leaf spring u-bolts on the front passenger's side was the most difficult aspect of the entire installation I've never seen a bolt like that before. Holy s**t. I never expected that to give me such a hard workout. An RSSA is required if your Ford F53 motor home chassis 24 has been damaged and needs repairs You will need 26k for this.

Anya Hoffman

| Mar 05, 2021

The build quality is good and the installation is easy

5/5

I would recommend it to anyone installing a steering stabilizer on a 2018 F53 chassis since it works just as expected, is easy to install, and is exactly what we needed.

Cassidy Horne

| Oct 07, 2020

The motorhome is a perfect fit for the chassis F53

5/5

It was an ideal kit for installing steering stabilizers (we installed Roadmaster RSSA Reflex Stabilizers). The biggest challenge was removing the U bracket bolts that were already in place. I just had to follow instructions and all was easy to assemble, though I really wish I had an extra pair of hands to help me hold up the stabilizer during the The price of this kit was the lowest on the market at that time.

Carolyn KNOWLES

| Mar 08, 2021

The quality of the product is good

5/5

For the installation of the Roadmaster Reflex Steering Stabilizer, this set of mounting brackets is required. In summary, the instructions are fairly easy to follow. A few more pictures or diagrams would be helpful, but once you are under your vehicle, you will see what to do.