CURT 17057 Round Bar Weight Distribution Hitch with Integrated Lubrication, Up to 14K, 2-Inch Shank
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It measures 1 1/4" with a reducer to bring it down to 1" in the kit
The specs on www.etrailer.com are as follows * (Curtmfg.com and the manual do not list drop and rise specifications) The maximum weight is 1,000 pounds A gross towing weight of 1,400 pounds is allowed. A capacity of 14,000 lbs is applicable to the following applications A trailer hitch receiver rated for weight distribution systems with a 2" x 2" mount. *br> Maximum rise 7". *br> Maximum drop 21. As it stands, I measured mine and this appears to be correct. There is 7" on the shank, but when inverted, you lose much of that length due to the 2 bolt holes required for securing the hitch head. It's upside down) so you can see what it's like.
From the manual which can be downloaded at www.crtmfg.com, the following table shows the trailer Gross Weight and Tongue Weight without spring bars 17050.17050 Not to exceed 6,000 lb. A maximum of 600 lbs. is allowed. Specify that the weight of the equipment is less than 8,000 pounds. A weight not exceeding 800 lbs is acceptable. The maximum weight of this container cannot exceed 10,000 pounds. The weight of the machinery cannot exceed 1,000 pounds. The weight on one item cannot exceed 14,000 pounds. A weight limit of 1,400 pounds is required. The spring bars are 17150 5,000 - 17550 A crane can lift 6,000 pounds. The amount will range from $500 to $1,000 There are 600 lb. in it. I found 17051 6,000 dollars, and I'm not sure where I put it There are 8,000 pounds of clothing on the floor. I am 600 pounds and I am There is a maximum weight of 800 pounds. The total for the 5,000-6,000 rate is 17052 The weight is 10,000 pounds. Please call us at 800-467-6879 The weight of 1,000 lbs is 17257 There are 14,000 pounds in the container. The following figures range from 1000 to There is 1,400 pounds in this figure. As long as the trailer ball manufacturer's weight ratings are not used, the weight rating is determined by the trailer ball manufacturer's weight rating. Please do not exceed the weight rating of the ball on your trailer. WEIGHT DISTRIBUTION AND HUMAN WEIGHT DISTRIBUTION DESCRIPTION FOR ROUND BARS
As far as the warranty is concerned, I don't know, but I can say that I've owned two of these in the last 30 years and never had an issue with them. With the latest version, grease fittings are available for lubricating weight equalizing bars, reducing wear on the vehicle while it is in motion. Thus, the new version has a great deal of improvement over the original.
Selected User Reviews For CURT 17057 Round Bar Weight Distribution Hitch with Integrated Lubrication, Up to 14K, 2-Inch Shank
Simple to set up, works well, however, for sway control it is not recommended. Having a separate control bar for sway is essential. There are 85 pounds of weight in the hitch. It has a reducer sleeve so you do not need a bigger shank ball to use it.
A 24' trailer with an ATV and SxS should be pulled. It's putting the truck to the limit with the trailer so they are adding to the ride height on the rear as well as to the stability. At only $200, it's a great deal. I found that the local Farm Store was a lot cheaper than I thought.
If the directions are followed, the device is easy to set up, and it works fine.
The question is, what should I The system worked as expected. I was surprised to see the package was torn, but since the item is heavy, I don't expect much to go wrong.
Made a huge difference in reducing sway.
I would have preferred a lighter trailer, but I have a 34'8" toy hauler and wouldn't have had any problems with this hitch. There is a maximum weight limit of 2000 pounds on the trailer. I have a capacity of 1800 pounds and I load this a lot. In a side by side arrangement, the hitch is incapable of controlling The hitch I was using wasn't good enough for me, so I had to go to a better one.
I was looking for a hitch that met my needs.
Related Products For CURT 17057 Round Bar Weight Distribution Hitch with Integrated Lubrication, Up to 14K, 2-Inch Shank
