ABN Trailer Wire Extension, 10ft, 4-Way 4-Pin Plug Flat 20 Gauge – Hitch Light Trailer Wiring Harness Extender
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In my memory, there are the same length wires on all circuit boards.
My order for the extension was for 8ft. According to the advertisement, it was as described. Using it with a 20-ft light set, I had excellent results. They were loosely connected, so I had to tape them in place.
If the 2016 has a wiring harness, that will determine what you need to do. You should be able to use it if it has a standard flat 4 wire harness.
A 12 inch diameter
Selected User Reviews For ABN Trailer Wire Extension, 10ft, 4-Way 4-Pin Plug Flat 20 Gauge – Hitch Light Trailer Wiring Harness Extender
It's been two years since I installed this wire on my flatbed trailer. As the copper wire within the insulation jacket had corroded to a white dust, I had to completely rewire it. In this case, all four wires did the same thing. There is nothing like it I have ever seen. I used to think that wire was wire, but I realized I was wrong! I think you get what you pay for here!.
There are instances when the hitch wire gets under the ball and I have issues with that. The nut below the ball would cut the trailer wires if the ball and nut were arranged the wrong way. Fortunately, this happened and it was possible to fix it, but I plan to avoid this from happening This wire will be used to run the trailer wires to my vehicle, now that they are bundled and secured. The trailer wiring directly gets crimped if it becomes loose under normal conditions, not the loose wire itself. I found this to be good because it was inexpensive and easy to replace if it could not be repaired. In addition, in case it is damaged while on an escape journey, I'll be able to run the trailer wires without it to the vehicle until I In this price range, I might buy a backup in case it breaks. It is useful to have these. I ensure that all of the lights work and there are no issues, and I don't intend to leave it exposed to the elements. I suggest using zip ties to secure all the wiring in case you make the same mistake. Because I used bungee cords, I discovered that the wires could come loose if there are bumps along the way. The bottom line is that if you need an extension wire for any reason, this is a very good option. Having a spare is not expensive, so if there is an error caused by negligence or inexperience, it can be replaced. The product is very good and solid.
A nice and secure fit is assured with these plugs. In order to test out the trailer lights on a few trailers I have, this extension was just what I needed. Rather than having to move around my truck and back into my short trailer plug, it was much easier to use. It was very easy to connect the trailer to my truck using the long extension and I was able to check out the brake and signal lights quickly. I found it to be very.
In order to extend the hitch beyond my slide-in truck camper, I had to extend the wiring on my boat trailer to plug into my truck after I built a 34" hitch extender for the trailer. I received the product quickly, it was well made, it is priced right, and it was exactly as described Other than that, I do not know how else to put it.
We will have to wait to see how well this extension is sealed. During installation, it was well made and fit fine at both ends, with the wire insulation properly encapsulated in the over-molded plastic A soft plastic connector molded into a soft body. I used this to extend the cable on a trailer hitch It was a three-lamp tail light from Bully (I don't remember the model). If I were to buy it again, I would.
I am not sure if I would stretch the wire/cable - There are no ratings in that area. Is Sheerness as far as you are concerned? Why do those wires have that on them? The purpose of the document is fulfilled As a protection and insulation measure, I wrapped electrical tape around it Don't let your cuts be exposed to the weather.
Has LED lights for each wire use, so you can see if the lights are working. Fits the requirement plus provides the convenience of knowing the lights are working. In the case of an LED on, the trailer light is working, but in the case of an LED off, the trailer light is.
It was a little longer than I expected. As a whole, I am very pleased with the ABN Trailer Wire Extension. It gave me the extra length that When it said it would be delivered, it was delivered on time. The product is great if you have a trailer with wiring that isn't as long as it needs to be.
Related Products For ABN Trailer Wire Extension, 10ft, 4-Way 4-Pin Plug Flat 20 Gauge – Hitch Light Trailer Wiring Harness Extender
