Camco 25583 AccuLevel Brackets
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Metal brackets are used for the brackets.
On our 5th Wheel RV, we mounted the brackets on the 12" pin box to make it possible to mount the AccuLevel. I really like how this works.
Selected User Reviews For Camco 25583 AccuLevel Brackets
As I was running into a little trouble, it took longer than I expected. It states to drill a 7/32" hole and to use the self-tapping screws that come with the Well, as has been pointed out before, these screws are soft, and I broke one. The first problem is that the metal that is used to make the hitch As I drilled the holes, I had a lot of trouble. It twisted off as soon as it bottomed out as soon as I put in the one screw. The inside of the hitch had to be drilled out, and I had to put in a smaller screw and nut. You have to travel a long way to get there (which is quite hard to find). am pleased with the bracket and AccuLevel that you gave me. As well as those, I bought a pair of earmuffs.
In order to mount an accuracy level on a 5th wheel trailer's pin box, a mount such as this one is essential. As per the instructions, you need to prepare You should use a 7/32 bit to drill the holes. The size of that is too There was a bit that I had to go up to. This is "206". It follows that the self-tapping screws included in this package are not self-tapping. Aside from being very soft, they are also very durable. One twist off before it gets screwed all the way in, and the other twist off. Obviously, I'll have to go find a better quality screw at the hardware store now. Perhaps if I had used a larger bit, these would have worked. We might have something to say The range from "210" to ". The threads on this part have OD of 220". The staring hole should be at least 250" in diameter since they don't have much stress on them.
If I had wanted to construct a few brackets or modify an item from the hardware store, I could have done so. It cost less than $90 for the coat and it took only 5 minutes to put on. It looks good and works like.
The shirt still fitted well even though it was a different brand. Those metal brackets are strong and sturdy. Delivered right on time and looks like it will last a long time.
Despite the fact that it is probably a good bracket, my pin box is too flat on top, so I cannot set the mounting holes in that bracket. In order to raise it up higher, I plan to make a bracket. You may be able to use this method if you have a steeper angled pin box.
In light of all of the negative comments regarding the screws breaking, I decided to tap and drill the holes before putting the screws into the holes. Even though this took a bit longer, it worked out perfectly. A 1/4" screw and a 1/4" hole There is no change in the drill size.
The brackets and AccuLevel I ordered to go on my MorRyde pin-up were both ordered. An object. There is no need to drill more than four 7/32 holes in the pin the hardware is already included on the kit. An object. About 15 minutes were spent installing the software. When the AccuLevel is installed, the slotted holes allow level adjustments to be made from front to back and from side to side. In my opinion, it is a mandatory item for the AccuLevel to work correctly on 5th wheel.
I think those should have come with the AccuLevel (this is stamped metal and a couple of screws), selling them separately makes no sense, but they do work well.
Related Products For Camco 25583 AccuLevel Brackets
