iK Foam PRO 2 Pump Sprayer
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
As with shaving cream, dry foam is like that. As it dwells longer and has more body, it will thrive longer. Thinner and waterier than dry foam, wet foam has less air in it. You can lubricate better with this.
In addition to the larger volume, the handle now has color coded caps and the base has a wider support.
There is no turning it off
Selected User Reviews For iK Foam PRO 2 Pump Sprayer
a few modifications, it works well. I have no problems with it. The warranty has been void since I modified it Since I don't care to pump it 30 times for 10 seconds of foam, I bought a metal valve stem from a car tire (yes, for the tire valve stem) that was chrome plated and very short (1/4 inch) for a more appealing In just five seconds, I can charge it up using my air compressor. Approximately 45 psi is the voltage at which the safety valve on the foamer opens automatically. Those who complain about the lack of foam should know that it is a problem. It's a waste of time reading the instructions. However, no recommendations are given for settings on the instructions, despite its availability in many languages. In addition, if you fill it all the way up, you are limiting the amount of air that gets into it, which in turn limits the quality and longevity of the For very good foam 1) I fill the bottle half way or not at all. 2) I use a green tip (3 colors included - let about an inch of air pass through to create a good foam so that the spray time is longer. Tips go inside the pump, not nozzle as you might guess) 3) I put 3 pieces of filter in the spray nozzle (which are included in the kit) 4) If the detergent you are using doesn't foam up (degreaser or vinegar), then I like to drink a cap full of water. When I use these settings, the foam is slightly thinner and sprays for 30 seconds before charging for 5 seconds with the compressor.
Its sprayer nozzle literally broke off after I put a batch of foam on the ground as The sprayer fell over after I bumped it with my hose. Because it literally fell over on the ground, I didn't think much of it. The nozzle of your spray bottle is completely broken! When you go to use it, you find that it is completely broken! In my attempt to get assist, this seller only recommended I contact the manufacturer if I thought that there was a defect. Of course, I attempted to contact IK directly. Do you think they ever responded to any of my attempts to do so? No, none. Those who wish to own this device should be aware that it is fragile as a glass ornament.
The fluid does not spray but there is a stream of fluid that only lasts for a short time since the leak is so large. The outline of the object can be seen It is not seating correctly in the lid ring, and this is what is causing it to As the reviews for this were positive, I had high hopes for it. However, despite my high expectations, I cannot give it anything Announcing an update The item will be returned to you. Therefore, I wanted to disinfect the item before returning to it. I noticed the rubber gasket on the plunger that seals against the inner tube was deteriorating when I took it apart in order to clean it. It appears that this item was previously I would imagine that this item is not of the same quality as the one I.
Honestly, it's a hyped up product, and isn't a much needed product, if anything, get the sprayer version for multi-cleaning because you'll be pumping it thousands of times per panel.
Both of these had issues holding pressure when I purchased them. As well, the spray tip on the second had been damaged.
It is a crucial step in my car care routine. Make sure your car is loaded with CarPro Reset, throw a leaf blower in the trunk, and head to your local DIY-store. Wash your hands. If you want to learn about ceramics - The coating must be removed first, then the car should be washed only with water and foamed with the IK before rinsing Distinctive water should be used for washing. The leaf blower can be used to get the leaf dry. It's boom time! You will no longer need to worry about scratches or high or low pH soaps on your ceramic coated car in the winter. In all seriousness, though, this thing generates quite a bit.
This is what I used to foam Adam's Tire and Wheel Cleaner. When I first used this app, I didn't expect it to work and was surprised when it did. There are about ten in a packet We applied 15 seconds of foam, which allowed it to cover the wheel well, tire face, and wheels well. It seemed that the foam gave off no smell and stuck around for quite a while. My next step will be to remove the iron with an iron removal product. I would like to know whether or not using the spray bottle results in the same level of cleaning without In addition, I mixed too much and ended up leaving about 1/3 of the liquid left at the bottom of This is half way through). However, I can imagine there are ways to use it better in the future (applying iron-on to textiles, for example Perhaps a water spot remover, or perhaps There is a solid quality to it. My surprise (in a good way) was pleasant. It may seem counterintuitive, but the trick is not too fill it up. Maintain a 32 oz tank so you have enough air pressure for the motor.
I feel like I'm swimming in In spite of diluting most (non-toxic and In the case of acid) wheel cleaners It should be a 5 out of 10. The following are the P&P buttons I used In S Brake Buster, the following has been noted It sprayed on like shaving cream with the purple tip that came installed. Don't forget to tighten everything else otherwise you will have to pump more than you need. In general, I have to reprime a wheel after a new one is fitted. Maybe if you don't want to have to keep pumping, you should look into the larger IK 9 instead.
Related Products For iK Foam PRO 2 Pump Sprayer
