Max Professional 2145 Rubber Rejuvenator - 10 oz.,Black and Silver

The printer in our office is a large format color printer that would cost $$$$ to replace. We have recently started experiencing paper jam errors and my feed is not working I saw some videos in which instructions were given to buy this product and spray the rollers. It took me about an hour to spray all three rollers and leave it overnight. Now in its third day of normal operation, the printer seems to be back to normal! The service guy was not necessary, so I'm glad I didn't call. It may be the fix for you if your printer is doing in the same way. As far as timing goes, I would suggest doing it at the end of the day as the smell is very strong and the last couple of hours of that day have been pretty stinky. With this nozzle, you can insert a plastic straw to put on the tip so you can reach those hard-to-reach spots.

Gloria Bird

| Jul 20, 2021

I write my jokes on my own. My experience with the Blow Off brand goes back to the late 90's when I worked at a computer repair shop and actually saw a Blow Off dealer stopping Despite the fact that she is the owner's wife, our administrator would buy cases upon cases The amount of resources we were given was WAY higher If you'd like to write the jokes, that's fine with me. It was a lot of fun. I'm content to be the 20 year old version of "rubber" (at least there are still opportunities for jokes). This would appear to be mostly rocket fuel and alcohol (like the 4th of July parties in Northern Michigan), but there is probably some other ingredient in there as well. In addition to upgrading our sheet fed scanner, it also worked great for repairing laptops. My complaints have been addressed. The key is to remember that if you turn any blow off can upside down and spray it, it spills a propellant that can be used to freeze something quickly. I find it useful if I want to use freeze spray to cool down a component, but don't want to spend money on a quart of it.

Julio Velez

| Nov 06, 2020

It seems that printers are affected by dirty or dried out rollers that lead to jamming. As for my printer, it's a Canon There is a Brother MFC 7340 printer available In other words, it became totally useless. It jammed less frequently now than it did before - the paper previously jammed sometimes but not every time. I was no longer able to print The idea of scrapping a machine that was otherwise good and replacing it was not appealing to me. A lot of the issue is probably my fault in the first place because I kept using and discarding the backside of paper after I no longer needed what was on the front side. I read the reviews and instructions and decided to do it anyway. Try it, I'll see how it goes. This machine has a long red nozzle, which allows you to point the product directly on the rollers and deep inside the machine. The rollers in the front of the machine had literally been covered with ink and were literally black. Once I removed the drum and toner cartridge, I could see they were black. Using the product, I squirted some into my hand When using the nozzle, follow these steps Apply it directly to the roller, let it soak in for a few seconds, then wipe it clean with the 2x2 square of cotton All black ink on the paper has come There was a bright white color on the roller's underside. After the first section of the roller was exposed, I manually rewaddled the roller, exposing the next portion. This process was repeated until the entire roller had been As it's only possible to access one small section of the roller at a time, you have to clean it several times before it looks equally clean. By exposing each section of the roller as you push it forward, you will be able to clean each section completely. Next, I repeat the process on the other side, replaced the cartridge with a new one, and reconnected the machine. To perform this cleaning properly, you must first unplug the machine I then tested it to see if it would work, and it did. I found out that the fluid was hazardous and it'd be a big mistake to shock yourself or cause an arc while you work on it. After this, I printed, and it worked great! It is well worth the small price to purchase this product to keep our printer in good working order. By using this bottle, I was able to save hundreds of dollars on To keep the long red nozzle attached to the bottle of product, be sure to use two strong elastic bands. A broken elastic band will make the nozzle very easy to lose.

Amelie Davenport

| Feb 12, 2021

A new roller was installed, but after a short time, I began having problems again. There would be more to the process than just picking up the paper. As a result, I ordered this on his recommendation. It was really nice to be able to fix a really aggravating problem for under $10. I have been using this for over a week and it has fixed the problem. I would highly recommend the Max Professional product!

Update It has been about a month since I reconnected my old Hewlett Packard printer, and it is still working without any issues. Even loaned the cable to another coworker for him to fix his printer, and it worked like a charm. Now that his printer is working again, it has been a week since the problem occurred. Still, if you are having trouble picking up paper on your printer, I strongly recommend trying this product. There are no doubt many other applications for this technology.

Natalia AKHTAR

| Jan 22, 2021

My company has several large format Epson printers, and I work in a large print lab. When you run double sided matte sheets, or anything that leaves a dusty film on the paper, the rubber rollers in the machine will be damaged. Using this stuff will allow you to use the rollers for a bit longer as it removes dust film and gives them a sticky feel You should be aware that this stuff will eat away any plastic near the spray, so you may want to use an applicator (like qtips) to apply it. You've got to spray in a ventilated area when using the spray, since it stinks to high heaven.

Samira Cross

| Apr 17, 2021