* Disclaimer: OveReview is reader-supported. We earn commissions from qualifying purchases
Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams

Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams

Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams
$ 15.88

Score By Feature

Based on 402 ratings
Customer service
9.48
Value for money
9.58
Delivery
9.51
Satisfaction
9.59

OveReview Final Score

How Our Score Is Calculated

Product Description

Compounds which are used as gaskets and seals around the world.
The world's major automotive manufacturers and several Formula 1 teams use this technology.
Vibration-resistant, non-hardening and non-setting, withstands rapid temperature changes, seals surface imperfections, and is not subject to hardening or setting. The material is capable of metal-to-metal contact and is resistant to combustion products, water, engine coolants, petroleum, lubricating oils, kerosene, and fluorocarbons.
Gaskets, threads, and gaps between as large as are dressed with this product. Approximately 25mm thick.

Questions & Answers

How can I permanently seal the 24" X 24" inspection lid on the onboard 60 gallon gas tank of my boat?

A Rubberized Cork Gasket for a Fuel Sending Unit would be a good choice if you are going to use this product. I used That was a nice job by Hylormar. In the absence of a gasket, I don't think Hylomar would be a good choice. Hylomar doesn't dry out or cure like RTV sealant does which makes it a less than a good gasket make.

Does anyone have any experience using it on a BMW valve cover gasket with ?

Thanks for visiting! In addition to sealing MG head gaskets, Cadillac 4100cc intake manifold gaskets, and a variety of other difficult applications, I have used this Hylomar gasket. It doesn't seem like a BMW valve cover gasket will pose any issues. It's as easy as applying a thin film on both sides of the gasket and closing it Consequently, the Hylomar does not shrink, nor does it dry out. Not overtightening the bolts that hold in the valve cover gaskets, whether cork or rubber, is essential. The torque spec for your car is probably in Inch Pounds, so you should follow it. I hope you find this helpful.

The threads are sealed in just minutes after this? It doesn't require any curing time?

That's right, it doesn't harden. It is very useful when there is an oil or coolant passageway in the middle of the surface of a joint. It will not block the passageway if applied too much, because it remains a thick paste, but it does not dry out. For Japanese overhead cam engines, I like to use it to seal the front camshaft bearing caps. It is vital not to plug the oil supply hole because that will result in the cams getting no oil and seized up In addition to sealing Lycoming and Continental aircraft engine crankcases, it works well on other types of engines. As well as old VW engines, it'll do a great job on Corvair engines.

Are these able to be applied to ?

On a gasket for a gas tank, this is used

Selected User Reviews For Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams

The product is excellent
5/5

My first experience with Hylomar is from the 1970s. Formula of this product was developed by Rolls-Royce aviation. I have used this product on many applications in the automotive industry where there was a need for leak proof seals, but also the ability to remove the parts if the component failed. The Cadillac 241 cu. in. produced in the '70s was a small engine. This is how. An engine that was good for its size but had a habit of developing leaky intake manifold gaskets due to an apparent design flaw. The manufacturer provided some "magic" tablets to add to the engine coolant in order to maintain seals. It resolved this issue when I coated the gaskets with Hylomar on both sides and the owners never had another gasket problem! There has been only one instance of that. I am sure there are many others. If you are in need of a problem solver, this product will help you.

Emerald Perry
Emerald Perry
| Jul 05, 2021
Hylomar has been a good investment for me for a long time
5/5

Hylomar is a brand I learned about when I bought my first old British motorcycle years ago. You only need a tiny bit of this stuff to make a big difference. When applied to both sides of a gasket, as well as to two matching surfaces of an engine or transmission component, it performs very well. The seal will be leak-proof and will be able to compensate for any imperfections on the fitted parts. Unlike rubberized tape or rubber-like ink, it does not harden and is relatively easy to separate from other engine components as time goes on. It is unlikely that a paper gasket or fiber gasket will survive, so it must When the Hylomar has been setup for a while, I found it necessary to check the bolt torque again. It does squeeze out and compress, and I always find the bolts need a small tightening. It's good stuff, I tell you.

Sky Stephenson
Sky Stephenson
| May 07, 2021
You can buy this joint sealant as one of the best products on the market
5/5

The remarkable feature of Hylomar is that it will never dry out completely. This makes it an excellent product to use when you want to seal a joint that's having coolant or oil pass There is no chance of excess squeezing out of the passage hole and blocking it off due to it not drying. The sealing of camshaft caps on overhead cam engines is one of my favorite uses of this product. By using a cam bearing, it eliminates the possibility of an oil leak without running the risk of plugging off the oil supply.

Alvaro Anthony
Alvaro Anthony
| Jan 24, 2021
It wasn't what I was looking for as I was looking at it
4/5

was looking for a sealant to put on the threads of a drain bolt for liquids on my motorcycle, and it didn't appeal to me. In a later conversation with customer service at the Texas location, I learned that this threaded insert will function perfectly for the drain bolt threads on the.

Colette Thomas
Colette Thomas
| Apr 24, 2021
There is no doubt that these products work! As part of the restoration of my 1960 Morris Minor, I have been using this tool
5/5

As part of the replacement of the fuel system, I used this product to seal the threads in the fuel lines and to seal the fuel pump gasket. As well as sealing the threads on the oil pressure sending units, I have used this to seal these as well. This Hylomar Blue is well suited to its purposes. A leak is not present. Neither hardens nor hardens. It can be used for gasoline as well as My restoration schedule includes a number of parts coming in the near future, so I will be using this throughout the project. In my opinion, it's worth checking out.

Landry Richardson
Landry Richardson
| Nov 25, 2020
You are doing great work
5/5

Throughout the years, I have used many different sealers. This one really stands out especially in comparison to other sealers. It was the first time I've used it on my 1986 Grand Marquis timing cover, water pump, and thermostat gaskets. I didn't see a drop of water leak from the car! One of the very first things that made me realize how good this stuff is was that I had to adjust the timing cover back into place without removing or loosening the oil pan, and the 2 cork corner gaskets had shifted FAR out of place. There was a slight chance I would have a leak after that, but the Hylomar sealed it up nicely! I'm very impressed with this product. I have EDITED the 2/6/2021 post to reflect the following An and a half after the product was delivered, the solidification caused it to become useless. The sealant I currently use is likely to last a longer time than others I've used. Because of the high cost and the lack of storage capabilities, I will not buy again. Despite the short storage issue, I bought a cheaper version made from Permatex and it works just as well.

Messiah FitzGerald
Messiah FitzGerald
| Nov 13, 2020
A good all purpose product that does not harden
5/5

It is the best coating for gaskets, seals, and etc that does not harden over time. This is what I use on brake hose copper seals, it works excellently. Since the middle of the 1980s, I have used this program. There are two kinds Rolls-Royce and Boeing In addition to working on Jets, I also When I was a kid, I had a 1011. The Lexus cam and front crank seals I did recently, many people on the internet had leaks and described "gluing" them in with silicone. I have no leaks and they will come out, so will you.

Mckenna Arroyo
Mckenna Arroyo
| Nov 08, 2020
This was my first time using the app
5/5

I liked this stuff a lot. The type of stuff we used was similar, but it wasn't the same. It will be interesting to see how it holds up with time but on first impression, I am impressed. I did take apart some stuff that had been together for about a week, and it worked just as I expected it to. I don't know why it wouldn't last a long time. Might not use it for things that don't It would probably be better to use RTV if your surface is uneven.

Cynthia Pearce
Cynthia Pearce
| Apr 07, 2021

Related Products For Valco Cincinnati 71283 Hylomar Blue Gasket Marker and Thread Sealant Tube with Nozzle - 100 Grams