Hondabond High-Temp Silicone Liquid Gasket 1.9 fl oz
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There is no substitute for high quality sealant, which mainly serves the needs of I don't think it will have a problem sealing up
I have found that this is the best liquid gasket sealant for Honda engines that I have ever Worked as described, as long as you followed the directions
If used correctly, it is a pretty good sealant or gasket maker. It may not solve your issue exactly because it may not be an ideal solution. But for $12, it's well worth a try. The threads of the sending unit should be treated with sealant, put back in, and follow the directions for drying properly. Your best case scenario is that you remain in the same position, just out of This won't harm you in any way.
As a child we were taught to spray aluminum spray paint on our head gaskets, there are similar copper-based sprays out there Sealers that are water-based are also available. It seems to me that silicone should not be used as a head gasket sealant.
Selected User Reviews For Hondabond High-Temp Silicone Liquid Gasket 1.9 fl oz
To make sure I get a reliable bond, I used I had no trouble working with it at all, and it If the mating surfaces have been previously gasked, make sure to clean all oil, grease, dirt, and previous gasket material from all mating surfaces. This was not my first time using Cleaner for brakes that contains chlorine. During this process, I thoroughly cleaned for more than 2 hours to ensure I wouldn't have to get back to do this again anytime There are a lot of people who will start their engine right after getting a new thermostat and regret it afterwards. You need to wait 24 hours for the cure time to last. Since I waited for 4000 miles, I have not seen a single drop of oil. During the last oil change, I verified all was fine with the vehicle and changed the oil. As a whole, Hondabond is my recommendation when it comes to.
To get the tube out, I did not have to remove any more of the packaging than I already had to. An area of the tube has been dented. Despite the fact that the nozzle isn't completely broken open, it does not appear to be new. It looks as if it was almost Don't really know how that will happen to an item with a cap on it that was supposed to be brand new. In addition, I found the label and packaging to be a little faulty. Sure enough, I checked the website and the tube shown is a different color from the one I bought. I received a white label on the back of the item, which shows a black back label. The problem could be with a different batch. However, after reading the directions, I found that it also has a mistake on the tube but not on the pictures. It says to close the cap tightly. I find it pretty My daily driver appears to be an imitation of this stuff so I'm not sure if I would trust it.
In all my readings about RTV, I read that it needed to cure for 6+ hours before the oil could come in contact with the RTV. This material has been used on valve cover gasket installations for 5 years. After starting the car 1 hour after installing the Honda Bond RTV, the rubber band texture of the material still remains. This product has a main flaw, which is the packaging, which is garbage, as there was oozing substance out of the bottom of the bottle. Store this in the refrigerator to prevent it from hardening over the winter A second tube that I bought last month may have a shorter shelf life
Update on the second tube Upon using the bottom for the first time, it A second carton/tube ripped after being used a third time, 3 months later.
Please make sure that you don't overapply the sealant to the point where it breaks off trapped inside the valve cover after everything is bolted As a user, I have used this brand before and it holds up over time unlike others. I would definitely buy from them The delivery took less than three days for mine.
Using this product, I've never had a leak. This is the case It's really great- A thick layer. It took me 3 minutes to get some air to finally come out of the tube. My first attempt was to use the screw-driver included in the kit Initially I was going to put it on the point, but I ditched it and squeezed it out on a surface, finger, etc instead, which seemed to work There are fewer messy liquid gaskets to worry about with this gasket, and it is easier to apply. I am in Arizona and the sun is quite hot in 100 degree heat, so care needs to be taken in planning your trip. The fact that it wasn't fully dry didn't seem to be a problem. Here's a tip You should be able to get a good number of uses out of one tube of this along with use sparingly. When capping it off, make sure you squeeze all that air out so it does not dry inside Squeezed some until it was hanging out at the end, then squeezed the cap on top of it to remove as much air as possible from inside.
Utilize your Kroger rewards card (or whatever grocery rewards card you have) to spread the salad dressing in a thin layer. On my dual sport motorcycle, I used this to clean the valve cover on the cylinder head. As the valve cover was not designed with a gasket, a liquid gasket must be used. There were a few permatex offerings I tried, but they eventually all leaked. We are really happy with this stuff, as it prevents the big Italian singlecylinder from leaking anymore.
So, I purchased this liquid gasket based on the instructions in a repair manual to help seal any seams or locations where metal meets metal. As a result, the primary gasket could not seal properly at seams as it is made of one piece. By doing so, a good seal can be achieved. It appears that no leaks have occurred so far. In other words, Make sure to follow the manufacturer's instructions for repairs, especially in cases such as.