Turtle Wax 53412 Hybrid Solutions Ceramic Polish and Wax - 14 Fl Oz.
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
This is not something we would recommend using an IPA for. A 3-day lead time is offered if there is an excess of product You only need one detailer with a clean microfiber to do the trick!
A polishing pad or a compounding pad can be used as necessary, depending on the number of scratches you have before you begin. I have used both an orange compounding pad and an Uro-Gel pad. When you have deeper scratches, you may want to use a heavier cutting compound and/or polish, and use this as your finishing agent
It should work on your Windows computer. I haven't tried it, but I don't see why it shouldn't. A product like this should help prevent water spots by beading up the water on your windows.
Selected User Reviews For Turtle Wax 53412 Hybrid Solutions Ceramic Polish and Wax - 14 Fl Oz.
If you do it another way, you will accomplish the same thing. It is you who are building layers of silicon dioxide and In contrast, you wouldn't be able to correct the paint if this polish/wax was done before spraying the paint.
A foam microfiber pad and buffer were used yesterday along with this product. Webbing in the paint and tiny scratches in the paint were greatly reduced by the product. There is a very light fruity scent to it. There is only a small amount that goes a long way, as the company reports that it only takes approximately 2 ounces. I found the ceramic polish and wax to be very easy to apply. In the directions, once you wipe off the product with a microfiber, you are to use a damp microfiber to level it and then wipe it again with a dry one. This worked remarkably well and was very easy. It takes you no time at all to notice how smooth and slick the surface is when you do the final wipe off! In the past, I've owned nine buffers as well as tried numerous polishes and waxes where I had to use them. When your paint is relatively good and you just have a few scratch that needs to be removed, then this is an excellent product for you. It also adds a very shiny and slick finish to the paint. Having waited a day or two, I plan to add the new turtle wax ceramic spray over the top. The overall experience was great, and I would recommend it!.
This is amazing! It is just sick how that shine looks! My plan is to use their (Hybrid Solutions) Ceramic Spray Coating after each wash going forward. The new Honda CR-V we bought for my wife Like a black diamond in a coalmine, V shines like nothing else.
The truth is that it is nothing like that. It's a pain to detail my truck because there are so many areas to cover. I wanted to find something that would simplify the process. I noticed that it still beaded water well, meaning it's not in bad condition. I followed the directions to the letter, applied the product on an overcast day with no direct sunlight, and ended up with splotchy, streaky results. The help line told me the best way to clean it is to wipe it down with a damp towel and then buff it. In the event that didn't work, they suggested the use of If I wash it down and buff it again wouldn't that remove the product? I did clean it and buff it again, and that did make it look better, Furthermore, it did not remove the contamination from the surface, because I can still feel the roughness when I run my hand over it. Having said that, I should have went over it with a clay bar, but this product is supposed to correct minor surface problems in a single For me, it did not work.
When I grew up, I began using better products to take care of my car. Turtle Wax came out with its ice products 20 years later. After that, the ceramic polish and wax were applied. My stubbornness finally gave way and I took the plunge. Wow! I am completely I was embarrassed by this wax compared to McGuire's Ultimate Wax! I also agree with the slickness being close to that of.
Only the lack of cutting ability prevents me from calling this an AIO. Compare it with 3D Speed or other AIOs, and you might think this is one. To that end, it is easy to use, does not require dusting, and can be shaken well before applying When two passes are made, the pad has less on it and more on it. Direct sunlight should be avoided when applying this product. A GG6 D/A usually for a medium to deep polish is usually set between speeds 4 and 5, with a pale blue or orange foam LC pad, or the Meguiars Finishing Micro pad, or my favorite the B&M. The 50/50 pad comes in S. The results are better when you go slowly. If any residue remains on the paint after you have finished a section, use a light mist of quick detailer to wipe it off. It shines very well, but it does not offer as much depth as some others. The protection lasts for two to three months on its own.
It was applied to a black 2015 Escape that had not been waxed in nearly four years living in Midwest climate. There were a lot of scratches and swirls on the paint before application. As I was working on the panels in a garage that was about 50F, I used a microfiber pad and worked it in manually. I let it sit on the panels for a bit before going to the next phase. My first step was to apply it to the entire car, then I began to remove My method involved wiping it off with a microfiber, leveling it with a damp cloth, and wiping I was surprised at how easy this was. It took me about 70-80 minutes to fully remove all the materials A microfiber pad is used to remove 80% of the swirls and scratches by hand. Similarly, color clarity and depth have both been greatly improved. My "go to" polish will likely be this one in the future.