3D Bug Remover - All Purpose Exterior Cleaner & Degreaser to Wipe Away Bugs on Plastic, Rubber, Metal, Chrome, Aluminum, Windows & Mirrors, Safe on Car Paint, Wax & Clear Coat 16oz.
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
This stuff is great for removing bugs and cleaning in general, and I use it to clean the large front windshield on my diesel motorhome. I can get more than a year's worth of use out of a single container. I fill a 5 gallon pail with about 2 inches of water, then add about 1/8 cup of concentrate. There isn't much that you require. When you apply it, it produces a small amount of suds. Make sure you rinse with water afterward. When it's finished, it leaves a residue that absorbs water for a long time; highly recommended.
It's not something I'd advise you to do. If you follow the instructions, this stuff is extremely effective against lovebugs in South Florida. It's possible to dilute it a lot more than you think and it'll still work like magic. Any dilution greater than 1:5 is too strong for me when I'm hand washing my car. It takes a lot of rinsing to get to number ten. If you don't rinse it off quickly enough in the sun, it will cloud your paint, so I don't recommend using it in the washer reservoir.
Yes, but it's possible that it'll be applied excessively.
No, it won't dissolve tar; there are products specifically designed for this purpose.
Selected User Reviews For 3D Bug Remover - All Purpose Exterior Cleaner & Degreaser to Wipe Away Bugs on Plastic, Rubber, Metal, Chrome, Aluminum, Windows & Mirrors, Safe on Car Paint, Wax & Clear Coat 16oz.
With a little effort, I was able to remove all of the bugs, but two massive splatters defied my efforts. Soaking in soap, hot water, alcohol, and vaseline is a good way to start. It was absolutely fantastic. I had high hopes for this product, but I was blown away by its effectiveness. I put two small patches of paper towel over the splatters after soaking them in it. I removed the stuff after 60 seconds and it came off easily. Without a doubt. It's as if it didn't exist at all. It's completely unbelievable. I'm not sure what kind of witchcraft was employed in the creation of this, but I adore it. It had no effect on the plastic windscreen. Please extend your hands so that I may give it four thumbs up.
I started with BugsN'All, which worked well but cost $17 for 2 quarts of concentrate. I tried this 3D Bug Remover Concentrate last weekend on a 1000 mile trip and also brought a quart bottle of BugsN'All for a side by side comparison. I used an entire bottle on a long trip and had to conserve some, so I wasn't too happy about the cost. I couldn't tell the difference between the two; they both performed admirably. I paid $29 for a gallon of 3D Bug Remover Concentrate. 99 and bought a chemical-resistant bottle ($5 at Home Depot) to put it in. That means I'll have to order 6 gallons of bug spray. When I multiply that by the price, I get $5 per gallon for the bottle, for a total of $10 (of course, I only have to buy the bottle once, so it will always be $5 per gallon). BugsN'All, on the other hand, costs $36 per gallon. $10 vs. For $36, I'll opt for 3D Bug Remover Concentrate, which is a much better deal.
When buying by the gallon, it's a great deal, and I dilute it 4: 1 is for large bugs, and 8 is for small bugs. 1 wash for routine maintenance. br>br>Sunlight friendly; I frequently work in direct sunlight, and even in 90-degree heat and humidity, I have confidence that this product will not damage any surfaces. Spray on, foam, and let dwell if you need a longer dwell time. All you have to do now is power spray the area. Since I started using this stuff, I haven't had to scrub a bug once.
It worked perfectly, despite the fact that it was 100 degrees outside at the time. I wet the surfaces with the water hose first, which probably cooled them down (as the directions stated), but it was still hot outside, and this stuff worked perfectly. I sprayed it on half of the windshield (because that's all I can reach from one side), then wiped the bugs away with a wash cloth. They'd been on my windshield for a few weeks and had gotten to the point where it was difficult to see through them! My headlights and chrome grill were also free of bugs after using this product. When I was finished, I rinsed it off with the water hose.
After a 700-mile journey in my Jeep Grand Cherokee, I sprayed this on. I sprayed it on, waited 3 minutes for it to soak, then lightly rubbed it in with a microfiber bug sponge before rinsing it off. Don't waste your time with the cheaper versions that give you poor results; this is by far the best solution I've found for removing bugs from bumpers, hoods, grills, headlights, and other surfaces.
Griots, on the other hand, are a dollar. 73 cents per ounce, and 3D costs around $. When mixed, the total weight is 11 oz. And while it didn’t work as well as Griots did, it was roughly 80% as effective in bug removal as Griots were in removal as Griots were in remov.
Even with a power washer, it doesn't do anything! I sprayed the mixture at the recommended ratio and let it sit for three hours. After 4 minutes, a hard bristle brush was used to scrub the area, after which it was power washed. The grease stains were barely noticeable, and the tire marks were unaffected. I went through the same steps again, this time using the product at full strength, and nothing happened! I then used only the power washer to remove some of the grease/oil stains, which I was able to do with just water pressure. This product is a complete ruse and a complete waste of time and money.
I've tried a number of bug-removal products over the years, and this one outperforms all of them. What I like about it is that it's concentrated, so it'll probably last a long time, and it dissolves most of the bug stuff, making it easy to get rid of with my electric power washer. When we go on long trips, I also have a fifth wheel that gets drenched in bug guts. Because of the graphics, I can't use a power washer on it, but the bugs come off fairly easily with a textured car wash sponge after a few minutes of letting the diluted 3D bug remover set.