Chemical Guys CWS_101 Maxi-Suds II Foaming Car Wash Soap (Works with Foam Cannons, Foam Guns or Bucket Washes), 1 Gallon, Cherry Scent
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Take five minutes to wait. We'll see what happens.
A foam cannon is needed, not a blowtorch. You can use a foam sprayer application if you wish. Using a foam cannon with a pressure washer is the only use for one. It is recommended you use a pressure washer with a minimum of 2000 psi to get good bubbles. You need to change the orifice in the foam cannon in a pressure washer to a 1 if the pressure is 2000 psi to 2299 psi There is one orifice to allow the super foam to stick to the surface. You will run into this issue if you have the standard orifice in your foam cannon and your pressure washer does not have 2300psi. The pressure of the pressure washer will not be strong enough to force your foam to stick to the car. In case you have a pressure washer 2300 or greater, you can use higher ratio orifices, or in the case your foam cannon is built with a standard orifice, this should also work on a pressure washer 2300 or greater. There is usually a way to tell when looking at the specs of a foam cannon, if it says that it can be used with a pressure washer that is up to 2300 psi. When the foam is thicker, it lifts loose dirt and allows it to be washed away faster. I realize this is a lot of information, but I hope it is helpful. My washer was a 2000 psi washer, though it was replacing its orifice with a one All you need is 1 orifice and you're good to go. If you are unsure how to change the orifice on the foam cannon, there are youtube videos on how to do it. If you want orifices like the first, you can buy them One thing to consider is that you should consider buying a 2000psi pressure washer from Amazon.
If your vehicle has a matte finish, you'll want the matte auto wash. Go to http//www. The Amazon website. Boys CWS995_16 - A meticulous approach- Can you finish/dp/B00BUFWN5E/ref=sr_1_1? UTF8 is employed. With qid=1462382985 and It's a 8- 1 & 2 Matte+soap = keywords
Selected User Reviews For Chemical Guys CWS_101 Maxi-Suds II Foaming Car Wash Soap (Works with Foam Cannons, Foam Guns or Bucket Washes), 1 Gallon, Cherry Scent
Although some people have said that it does not remove road grime, tar, and bugs, I did not expect that it would be effective by applying the product I use a no bucket wash system instead of an old-fashioned two bucket 1.
After power washing my vehicle with plain water, I rinse it thoroughly. By doing this, most of the loose dirt and contaminants are removed, and the bugs are also wet for the following Please read 2. use my foam cannon to spray thick foam all over my vehicle. I connect it to my pressure washer and attach it to the foam cannon. In order to start washing the same area where I began applying the soap, I use a microfiber sponge to soak up the soap on the whole car. As I scrub the car, I pay special attention to the areas where tar and bugs are most 1. 2. 3. After finishing the wash, I start rinsing my car with the white nozzle of the power washer. Using a power washer was the only method for removing the already softened bugs and those that hadn't already been removed in
Around 99% of the bugs and tar have disappeared as a result of step 3. You should be aware that I haven't washed this vehicle in three I've recently purchased a floor washer equipped with 1,600 PSI built by Greenworks and foam cannons made by another brand. 10 years old, with more than 103,000 miles on the odometer, my car is 10 years old. We wish you a successful wash project. Taking care of my house will be my next project. There have been some soiling signs over the winter due to the fact that it is almost four years old.
The soap is sudsy and soapy. A soap that sticks and is slippery at the same time!
I like the scent a lot. I would have preferred it if it stuck around after rinsing
Sprayed with a foam cannon that came with I just did a quick spray on the first photo. Try lightly applying it to see how much it sticks. * The image on the left portrays more of a "full coverage" pass a video of it can be viewed below. You don't need much to get started. Unlike most other items on the market, this stuff As a matter of The 30th - A little more than an hour later, when I was getting ready to leave, there were still suds on It's a lot cleaner now that I've rinsed Although it takes an age for it all to be rinsed away, it does take awhile. This foamed up from the water coming out of the door channels, the water running behind the roof rack, and so on. So I let it soak while I sprayed the whole truck down and then took my time maneuvering it with the wash mitt. It did not appear that everything was CAKED on, but everything could be wiped away We are not claiming that the soap is magical. Yet it worked just as well or better than any other I've used! Using the RV water softener on the hose, I rinsed it and it came up nearly as clean as it was when I put it on. With just a quick drive, there is no soap streaking at all (soap towels weren't used). My speed slowed me down a little, so I only had time to complete one complaint. Does the bottle have a weakness? A dent appeared in the bottom corner of the jug, although I have no idea how it happened. There appears to have been a hole created by this. I started with a 12oz tube of soap in my 6oz bucket, and 13 of that ran out into the 5 gal bucket (which contained all of my other washing gear). The majority of it was saved by topping off my spray bottle, refilling another soap bottle, and currently storing this jug on its side to keep soap from running out until it's time for me to use.
I removed the sap from the tree. My plan was to use this product to wash my car before I applied Turtle Wax Bug and Tar Remover to remove the oak tree sap that had accumulated on most of the paint and windows. It usually takes me about 10 minutes for a large batch of foam to form a full bucket of water. I opted for the process of using a heavy dose of Maxi Suds II. Afterward, I rinsed the car with water before washing it. My astonishment was that not only did it clean the car, but also removed most of the tree sap from the hood as well It took me a while to scrape away some tree sap with my fingernail, but I washed it off with a good scrub and rinse so it's gone now. It is not necessary to use a bug and tar remover. The impression I received was truly impressive. As an overpriced fruit gum scented car wash, I had dismissed this stuff, but now I'm rather taken with it. I've subscribed to it and saved it to my saved.
Here is the hose that I have- I used a sprayer for the final rinse that allowed suds to become formed, which made it easier for the soap to work and lay on the suds. I soaked the car in water, then with suds, and followed with a mit and two-part wash solution. Once the bucket is full, suds must be run Last but not least, I rinsed with soft (Culligan-type) water A shaded location served as the best option for air drying the trees (after they were treated with water). In general, it was a good spot It appeared to be a free result, although I am confident that if I had rinsed more thoroughly, no spots would have appeared. If I rinse more at the end, I'll try again. Dust or winds will not prevent spot-free rinsing if you live in a dusty or windy area as whatever is in the air will stick to the wet vehicle once it's dried out. As soon as you can, you will want to dry your hands.
Whenever I drive my truck, people always ask me if it is detailed. That's what I tell them. It's a great way to exercise and drive a clean truck gives you a lot of pleasure. **** To be honest, I find that anything from Chemical Guys is very good, but their prices are higher than average. Like the old saying goes, you get what you pay for. I don't mind the price as long as you take it seriously. Aromatic and has a fruity smell. My favourite of all is bubbles and good smells when I wash. This is a good one for that. It used to be that I used a cheap brand until I tried this one. There are a lot of good detailing products from this brand. Honey dew scent smells very good and was purchased by my daughter. You want to wash more after that. I love it. You might also want to use this soap if you find your microfiber towel is black (get rid of all the dirt with this).
Here are the good things Despite the bad smell and bad foam, this stuff is very good to use. Here are some of the negatives With this soap, I had to work very hard towards getting my vehicle clean compared to my old Meguires soap. It took a long time to remove dirt and bugs with this stuff. I used a foam cannon to spray it first and saw virtually no cleaning after a couple of hours of letting it sit, then power rinsing it. After using the wash mit, I saw dirt coming off, but I was still having to apply pressure the entire time. Wish I would have gone with the smaller size to start with.
Related Products For Chemical Guys CWS_101 Maxi-Suds II Foaming Car Wash Soap (Works with Foam Cannons, Foam Guns or Bucket Washes), 1 Gallon, Cherry Scent
