Torq EQP323 Snow Foam Blaster R1 Foam Gun, 1 Pack

dvr. gov. If you are looking for a way to clean your car or truck quickly and thoroughly, this is a must have. This is way better than using the bucket & spade The "sponge" method is one I've always been using. When I used this and an extension brush like at self-service car wash places, I was able to do the whole car in under 5 minutes. As far as I know, I have never seen anything like this foamer before Using it in the best way I could find 1. 1.

. Before you wash your car, give it a PRE rinse. The clear hose should be connected to the nozzle positioned In this case, the colored nozzle inserts could be used to control the amount of foam. Then add 2. To hook up your garden hose to the handle, connect it at the hose connection. The
3 section. You'll add 3 ounces of the car wash liquid to the tank after you've filled it up with water. Make sure your vehicle is sprayed.

Carter Hansen

| Aug 28, 2020

There's nothing special about it. In terms of the build quality of the container and handle, they are good, but the connector between the container and nozzle is On the handle is a quick-release connector that lines up with the handle. It's made of junk, and it's easy to misuse. There is no way you can even pull it back without it getting stuck, plus it is made of cheap plastic and it gets really stuck if you try to pull it back. There are no complaints about the handle, which has a heavy weight and nice brass fittings. As well as the shampoo, there was a soap included in the package. Given that the hose is connected only via a single point, the amount of suds is decent, but it has to use an astronomical amount of soap and literally suckers through the soap and water container. It took me 2 containers of soap and water to clean a car. I thought the final results were nice, the car looks good, but with a price tag of nearly $50 you should be expecting better build quality and To clean your car effectively, you still need a mitt, a bucket of clean water, and perhaps a second bucket with soapy water, so it isn't worth the money.

June Dyer

| Dec 30, 2020

As of June 2018, I have used this product about once a week or so since I bought it in March I find the concept to be interesting, it does what it says, and I think it can save me time when I am washing my car. This means you shouldn't expect it to perform to the same level as a genuine foam gun. However, there is a problem with the quality of workmanship on this item. As a rule, I wash my cars by first wetting them down, then attaching a foam canister, then scrubbing a section of it with a mitt, detaching the canister, and finally rinsing the entire car. The canister is difficult to attach to the sprayer. There is no 'click' to indicate that it has been attached correctly. Once you push it on, then pull back to see if it's locked in, you need to push it on again and see if it's locked It is often necessary to use two hands to attach the foam canister, which means that you either need to put it down to attach the canister or hold the whole thing under your arm as you attach the canister. Taking it off is the same issue. In addition to that, I had a problem with the spray regulator on the back, the one you turn to adjust the spray coming out when you operate a sprayer. It He did not have much tension on it and he would easily work his There would be times when I would have to hunt for it on the driveway, find it, and reinstall it. Apparently yesterday, it fell off as I was putting away my car dealing supplies, and since then I have not found It looks like this item will end up in the recycling bin soon unless I find another one that fits. I would choose one that is built better if I were a consumer.

Gage O'Brien

| Feb 10, 2021

As a result, the manual feels more like an inventory of a general nature, because it doesn't mention what effect the jets have on the foam or where they go. After a fair amount of trial and error, I've figured out how the software As of now, I am experimenting with how much soap to use with the different jets and how it will perform. I will update the rating once I have tested The May 12, 2020 update is now available. Have tried a wide variety of soaps and water dilution ratios, using three different jets and three different jets. In the end, all it will produce is a very heavy sud You simply won't get any foam from it. The only way to create foam is by using a foam cannon. It has been reduced to a 1 from a 2.

Elijah Banks

| Oct 31, 2020

There was a great soap included with the attachment. I did not have to scrub my car, just blasted it with the foam and rinsed it away. It smells pleasant and cleans the car well (I did not have to scrub it). While the foam cannon itself is a pain, it's useful in other situations. Despite the construction of the nozzle being of good quality, the connector that connects to the cannon is poorly made and never seals correctly. I had a problem with it popping off when I used My original thought was that I may have turned the spigot up too high I accordingly I still had to pop it As long as I was holding on to the foam cannon, I managed. In addition, the soap ran through quickly, so you have to detach and reattach the hose often, especially if your vehicle is large. To reattach it, you will need two hands as well. Things can get frustrating very quickly.

April Wilcox

| Oct 25, 2020

It was so nice to use this in 26 degree weather that I went ahead and did so. As expected, I received more than I expected. The extra money I spent on this was worth it compared to the cheap one I had bought previously. If you use Chemical Guys soap, I highly recommend it. Buying a gallon for multiple uses will save you time, as you do not need to order every time. Ultimately, it was all I could have hoped for. In addition to its foamy quality, it leaves a bright shine on the skin.

Cali Ashley

| Jan 25, 2021