Fasmov Car Wash Pressure Washer Jet Wash 1/4" Quick Release Adjustable Snow Foam Lance Foam Cannon Foam Blaster
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It is indeed a good question, since the product description states that the foam cannons require a pressure washer with two gallons of water. The GPM should be zero and the PSI should be greater than 1000. A Ryobi has enough PSI, but it does not have You can nevertheless use this foam cannon with the pressure washer, based on my experience. A 5 oz bar of soap and 20 oz of water is all that I use. Using that much soap is a bit excessive, but even professionals use more soap than is typically necessary. In addition to using foam cannons, they use higher end ones as well. However, I've had good results with this setup using Meguiars Gold Class or Chemicals Guys Snow Foam on a Ryobi 1600 PSI pressure washer.
If you use the recipe with rifai water, you do not fit it up with concentrated soap - you add it up about three-quarters of the way and it works fine.
There will be pressure, sure, but none will be applied. It is much better to use a power washer to spray siding cleaners. When soaps/shampoos are made into foam, they are applied with a foam cannon. The residue from siding cleaners is most likely not to foam up. They're meant to be used with high pressure water. Also, I don't think it will perform as well with a foam cannon as it will with a pressure washer, compared to how it is designed to work.
Your desired amount of soap is added, followed by your desired amount of Once you are finished with the foam, attach it to your pressure washer gun.
Selected User Reviews For Fasmov Car Wash Pressure Washer Jet Wash 1/4" Quick Release Adjustable Snow Foam Lance Foam Cannon Foam Blaster
It's not worth it to spend $50 on a ring I bought a foam gun for $100. As a professional detailer at a car dealership, I use this foam gun on 20+ cars every week and I have never had a problem with it. The solution 1 is diluted as follows In comparison to the other 10 soap concentrates, the foam gun blows thicker suds every time. The bottle has 100mL markings on the side, and both knobs change the angle and add more soap as needed. I've made a few adjustments to the settings on a few cars, and now I just have to add a bit more soap to get it just the way I like The bottle usually lasts me for at least two or three cars before I need to re-fill it.
Much like many people, I spent a great deal of time searching for the right product. I watched several YouTube videos and read online reviews that said it is a great There's no difference between Chemical Guys and Chemical Guys except that the bottom of the bottle looks different. Additionally, the price tag is MUCH higher. The description of this product is as follows Made of thick plastic and brass, the unit is HEAVY in the hand. In that case, I would rate it an A. It's easy to control the amount of soap with the dial on top. However, usually you'd like to leave the valve all the way open so that you can spray maximum soap amount, or all the way closed if you'd like to just spray water only. The usage of these objects is as follows There is a Greenworks 1700 psi pressure washer in my garage. As well as researching which soap to use, I did extensive research on how to use it. It doesn't matter that I am not a professional, I didn't want to spend $35 on Chemical Guys brand. Simply something that will accomplish the job is what I need. Ultimately, I bought RainX 100oz (green) from AutoZone for a little over six bucks. The results are It doesn't take a genius to see how the results stack up. Soap had been filled to about the second notch on the bottom of the container. probably could have achieved the same result with less soap, but for a first try it worked nicely. With one full bottle, I was able to wash (2) cars. It gave me a very good stream of foam that stuck very well to the car. This purchase has been very satisfying for me. Thanks for reading this review. If you're happy with it, please like it and share it with your friends. An image is attached to this review as well.
I did not get paid to use this product or give my personal opinion as others did, so if you read a review that says it doesn't, then they're either not using it correctly or using the wrong product. The products were exactly the same, so there was no reason to spend any extra money on a fancy brand name. It should be obvious from my pictures what I am speaking about.
I'm very pleased with this product as a whole The foam in the washer I have is thick and I have a Greenworks 1500psi washer (not THAT powerful). My SUV is a decent size, so I filled up a liter bottle halfway with hot water (first line with soap, the rest with hot water to halfway) and it did cover the entire car once and a half times. If you are going to fill it up for a single vehicle, don't go all the way! You can adjust the flow of water with the knob on top of the device The intent is not to make soap My opinion is that this is counterintuitive. Hence, if you want more foam, just turn it to the minus side. I left it on the minus side all the way (max suds) and I got just the right amount. The "proper" procedure is to foam the car, then pressure wash it off, then run a sponge over it to clean it in contact. Using this method, the contaminants that cause paint to swirl should be removed. To be perfectly honest, this did not make a huge difference to My intention is to pressure wash the car only with water in the future in order to remove the large contaminants, then foam it and contact wash it again while the foam still remains According to my experience, foam followed by a rinse does not do nearly as much as a rinse without the foam, and a rinse with the pressure washer by itself does more of the work. It's your call. Additionally, foaming the car is a lot of.
The letter A The star rating was given to my review as it did not work like many others have explained where there is no foam. The low cost of this product led me to take the chance to try it. However, the odds were against me in this case. One thing one does not like about the foam cannon is (1) no foam is emitted from it (very frustrating), and (2) water comes out at a very strong stream. There is a need to ensure the tips of the restrictive blades are very close to each other in order to achieve an acceptable 'fan' pattern, and (3) no matter how much you adjust the foam knob on top, you will never see the foam. My sense is that the customer had to drill out the connection hole where the bottle tube connects, but ultimately, that shouldn't be needed. I read another review where the customer had to drill out the hole where the tube connects, but I think that shouldn't be necessary. My original intent on returning the product was to go back to Amazon, but the option to return/exchange or receive a refund is not available. There must be a better foam cannon out there, since I will be looking for another one. I appreciate you taking the time to read this.
In a couple of months I will update this after my first wash. Using the Blaster for the second time and it is once again an outstanding product. The soap fills a bottle to a depth of about 2 inches, enough to cover a big SUV with foam twice as much. Update
In the past dozen or so times I've used it, no issues have come to light. I stepped up my soap to Meguiars Ultimate Wash & Polish It's a wax that works well.
The new Briggs & Stratton mower I purchased is in good working condition We offer Stratton power washers and our full line of car detailing accessories. These foam cannons come with towels, microfibers, foaming wash, and foaming wash. I hooked it all up tonight and got started onto the car, then hooked up the foam cannon. I was super excited to foam my car up, but when I pulled the trigger, the foam literally shot across the driveway and busted the nozzle. As dumb as I was, I tried it again, thinking I may not have had it connected properly, but the result was the same. Assuming the 1/4" connector on the cannon is not fully seated in the quick disconnect on the pressure washer, I think it's a loose connection. After all of that, I went to wash my car with a bucket and an old rag. You might have been able to save several hundred bucks if you just did that the first time!.