SINGER 00097 Iron-On Mending Fabric, Fabric Patch For Mending ClothesWhite
Score By Feature
OveReview Final Score
Questions & Answers
A flexi rod is much more flexible than an iron rod The denim patch is soft, but not as soft as cotton or linen that have been washed over and over again. There is another layer of fabric, so it will add thickness, but it will be much thinner than an actual In my case, I used it to repair a 100% linen sheet and it worked
You should be good to go. For some bed sheets, which were a mixture of cotton and synthetic material, I used it.
There is no requirement for the material of the cloth on which you write.
The dry iron should be heated for at least five minutes on the cotton Make sure the patch you use to mend your clothing is a bit larger than the area to be fixed. If possible, cut the corners of patch so that they are Place a piece of paper underneath the hole before applying the patch if the patch will cover it. Preheat the worn areas of the garment with an iron on a firm, protected surface (ideally the ironing board). [That is not necessary, I think. Place the shiny side of the patch on the Put your hand firmly on the button for 40 seconds The iron needs 45 seconds to heat up. If the patch has not adequately adhered, allow it to cool. You may need to press again if necessary.
Selected User Reviews For SINGER 00097 Iron-On Mending Fabric, Fabric Patch For Mending ClothesWhite
The following has been updated The patch is still perfect! It has been washed at least once a week (some weeks even up to three times), and the blouse is still white Yellowing is not an issue! Despite the edges and corners of the garment being adhered, it still appears to be intact There is no rolling allowed! I also found that the patch didn't fray in the cuts I made! As a result, I am extremely satisfied with the value I've received from these patches. I have used this product to sew on a patch to cover a scratchy tag that was sewn into the seam to prevent it from coming off. A wonderful way to cover the tag is with a patch! So that I could iron it on and make it adhere to the garment in the best way possible, I cut off as much of the tag as I could. The second one has also worked and I've washed it for about three months and have not encountered any issues. It's great knowing that good products can still be made down to the smallest details! I outlined the original phrasing in my post ------------- In fact, I tested it for the first time. I ironed on a patch where a shirt got ripped at the collar due to a hanger with a nail or staple poking out of it at a hotel (this is why I like As such, I cut out a patch three times the size of the tear and ironed it on from the inside. On the outside I ironed on just a small patch to I like the way it looks and the collar covers all of it. They make a good addition to a blouse because they are thin and translucent, so you can still see the blouse pattern through them, and they seem to move with the cloth as opposed to The inner side of the patch, together with its thinness, really makes the patch impossible to feel on any part of This solution meets all my needs, so I'm extremely happy! I am interested in seeing how well it will hold up in the washing machine and dryer. There is a possibility that most patches will curl up and lose their adhesive after a couple of wash cycles, so we will However, I am extremely happy for now.
There is a steam control on my iron, as well as an adjustable temperature level. It was obvious to me, even though I wasn't planning on using steam, where I should have placed the iron when I saw that. About 20% higher than the lowest steam setting, I set the dial. My next step was to measure the temperature after I got it to work. In that setting (iron surface temperature), the iron seems to be able to maintain around 400 degrees F. The patch was oversized, and a smaller piece was placed over the actual hole in the fabric on the other side. I found it to be very helpful. As I was heating the patch, I kept moving the iron throughout the area, because I was not able to heat the entire patch while keeping it perfectly flat. When I reflect back on it, I think it's a good idea to keep The patch I applied let much less of the original color through than I had anticipated. I thought I had completed the job until I noticed this. Since this material is pretty thin, unlike a denim patch for instance, if there is a contrast between colors, the material underneath will show through (the material does seem durable, though thin). I was repairing a black pocket, and you could clearly see a difference between the area where everything had gotten to the correct temperature for a sufficient amount of time and an area that Not enough time was spent on the area that did not see a change in appearance (the original black material did not show through the patch). As I worked that area with the tip of the iron, I wanted it to have a similar appearance as In my opinion, it doesn't turn translucent, but that's about all I can say about As long as it looks like that, the adhesive seems to have adhered effectively. This patch material still looks like the original patch material, so you need to heat it for a bunch There was one review where this was rated very poorly. It seems that their iron may have been at too high a setting. As I did not read that review before I started, I was concerned that it might be possible to overheat the adhesive. After reading that review, I thought it would be good to quantify what I found to be an optimal temperature. There is some visible feedback as soon as you do it, but unless you have done it once, you can't know that. Temperature was measured by using an infrared pyrometer (non-contact temperature probe) from an automotive or HVAC system. It is my hope that this will help.
You'll eventually be unable to wear any type of dress shirt with ease because the elbows will fail first. I used to toss the shirt in the trash whenever this happened for years. This product would have been useful to me if I had tried it sooner. The idea of using this patch for the inside of a sleeve was a revelation to me at the first sign of fraying in a dress shirt. It doubled the life of the shirt. The patch is easy to use, but please read the directions carefully. A shirt I made with the iron has been damaged because the instructions said to hold the iron on the fabric for at least 30 seconds, which I found incorrect. The iron worked well on 4 out of 5 shirts, but the fabric on the 5th shirt was heavy cotton and the iron burned it. In fact, there's probably enough product here to properly repair 20 shirt elbows, so the price is hard to beat. My elbows were damaged by Tenacious tape, but after washing, the tape fell off. I like this product much better. In my experience, the patch adhered well to the shirt and is still holding strong after 3 washings.
My first impression of the material was the nice white color and the feel of it. I was able to repair a white comforter with this fabric. After I repaired the patch, I washed all the rows of my comforter in a heavy duty, triple rinse wash with hot water and the patch did not move. The ends of the fabric did not fray or come undone, as I was worried. The new comforter looks great and saves me from having to purchase a new one. My recommendation is definitely to try this! I have updated the information. It will take place in September The white comforter patch has been applied to my comforter for a handful of months now. So far, the patch on my comforter has held up after several washes. The fabric hasn't frayed or shown signs of weird coloration. Although it becomes a little wrinkled after being washed, ironing for a few seconds tends to take care of that quickly. That is great that it has lasted this long!.