Broan-NuTone F402423 Exhaust Fan for Under Cabinet Two-Speed Four-Way Convertible Range Hood Insert with Light, 24-Inch, Black

Though one or two screens fall out over time, I initially enjoyed working on it, though 3 years passed. This isn't the right time. Way too soon.

UPDATE: After I left a review, customer service responded, and after a few phone calls I received a new motor which was easy to replace as it simply needed to be replaced. As of now, the machine is working fine. The "5" was not given because it shouldn't have stopped working at this point, but the four was received because they fixed the issue after all. However, it didn't charge me even though it was out-of-warranty.

Tate Lyons

| Jul 06, 2021

A good choice for a hood that has sat in an older house for over 20 years. This was definitely the cheapest hood I checked at large boxes, and the reviews on it made me glad I bought it. At the same time, it remains as good looking and as quiet as other budget models that you'll find at the big box stores. The process of installing the system was quick and easy. Usually, I have an equivalent 75 watt LED daylight bulb installed. The LED bulb has a lot of brightness and has a very light hood that is much cheaper to replace than halogen bulbs. In my opinion, this fan offers four exhaust options in four different directions. After removing the old fan, I discovered it ran out of battery power. The outside is closed. The idea is therefore not advisable. It came out as ductless since we were installing a charcoal filter rather than the old one which cut a hole in the roof and extended the vent above.

Faye Cole

| Apr 26, 2021

Last year was mostly about renovating our kitchen. In the 70's, the house was built and never was remodeled, so it was wooden for centuries. Despite being situated in the middle of a house, this kitchen has black over range microwaves, laminated shelves, laminate countertops, and hardwood flooring that looks quite dark. Almost every cabinet was painted white, ripped out the monster of a microwave, and is needed to go into the space the microwave occupied. In the meantime, I liked the idea of cooking without going downstairs. When my husband started asking how wide my range hood was, I began considering one. There are a lot of new issues in a house requiring unforeseen increases in price, so in order to avoid adding to this mess, we needed a budget-friendly hood that allowed for a rectangular duct at the top and came with some accessories. Our review included many brands/models and several comparison prices in our search for the best product. The relationship she has built with us is nothing short of remarkable. The range hood on my new dishwasher was a dream come true from someone who'd grown accustomed to using a dark, dirty microwave with no light or noise. A new one might have appeared in my house as early as March or April 2017. I haven't let the new light dim the cooking (I enjoy using the new light when cooking). As you can see, the fan does an amazing job sucking steam right off the page. The only time I have burnt a piece of paper with smoke has been when it needs to be blown out, but I use cast iron exclusively, so when I fry chicken or steak with cast iron, there is some smoke that is picked up, but sucked right out of the fat. Whenever I make spaghetti and boil the noodles (we usually do this each week), I usually use a fan. Maintains my house clean, as it keeps the refrigerator above the stove from flooding the cabinet. Would very much recommend this particular item since there have been no issues.

Willie Payne

| Feb 08, 2022

Surfaces on stainless steel are unfinished. As they wait for grime in the stainless steel to appear permanently, these surfaces tend to have a look of buildup. As with the bare lightbulb, there are no guarantees. Plastic domes covering ductless panels would not stay put due to the fact that they do not fit. Additionally, it is generic cheap plastic, probably the same as the finishes of every painting. would you rather not duct tape? In the same way, the results are the same. It is necessary to wear caution when bending sheet metal corners since their protruding surfaces are sharp and curving. There would have been little difference between this stainless steel boat and other models. On the front finished surface, though they did not grind the spot weld scabs or polish them in any significant way. Also, because the car's motor works all the time and its high pitch makes it sound annoying, it is not useful. Neither its design nor its production was ever designed with pride.

Nicole Brandt

| Nov 18, 2021

From what we can tell, this new hood features little damage to the front edge along the edge just north of the center of the chest. It was painted white and orange. Having been informed that it was not noticeable, I installed it anyway. Approximately two weeks went by and I noticed it a lot. Upon looking at it for a second, you get the impression it has disappeared. As far as I'm concerned, I simply remembered it in consideration of this review. UPS might have handled the shipping box if it had not been placed there. Using the old hood plug, stripping the power connection and securing it with an extension cable was quick and easy after the breaker was turned off. It is the policy of the manufacturer for the hood to come hard wired when shipped. Each new installation will require a plug adapter to ensure its connection to the cable that was previously installed. It filtered through the old hood. My objective in operating the vent through the roof was to ensure I made the process as difficult as possible for others. It is secure to attach the roof vent's knockouts to the wall. To warp the hood, an entire force had to be forced on them so that it knocked them out. A new installation does not give away where it came from. included as a set that will clip on the outside of the hood as you blow air through it. With the help of duct, the plastic cover was put directly to the vent through the nozzle. A black plastic hood appeared Cheesy to me as I thought its white surrounding appeared plastic appeared cheesy on the front of the hood. A 6’ tall roof makes the hood look sleek from any angle. To see if the underside is even unfinished, stand 5 feet high. There was no problem with that. If you want something with stainless steel finish on its underside, you can find that option. After installing the appliances around our new ones, our existing ones were replaced cheap, convenient, and easy to maintain.

Kylee Hansen

| Feb 02, 2022

In my case, I am upset. The box was damaged, hence the range hood being damaged. The return of stuff like this typically requires taking it back to Kohl's for a refund. Afterward I looked at the tattle hood and found no tattle nose and no buttons were worn apart. The fan housing and filter made it. Because of that I removed the bent parts and installed them. In addition to being extremely bright with an LED bulb, the fan runs fine. Despite the Amazon drawbacks, I believe that I'll continue to buy it. The good news is I'm keeping some money with prime for saving some time, but I don't want him to deal with headaches as they have to reseal the damaged boxes again.

Leslie McCall

| May 04, 2021